My Terrano Thread.

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Some good work here Dougie! You're cracking on! :thumb2

Thanks mate, the same guy that gave me the lights wants me to get a train horn, keeps showing me links to wanna be loud horns, I just laugh and tell him to get to America :lol
 
So I made made switch pod out of alu, fibreglass and filler, still needs a bit more sanding but I wanted to fit now.
I'm gonna take it off and improve the wiring behind it and I'm going to Flock it, like they do on rallycar dashboards :D:D:D
20200307_170357.jpg
 
I've put pilot holes in for another three switches, the blue one is for roof lights, red one for rear work light, both switches illuminate when switched on!
20200307_170420.jpg
 
Very posh mate:thumb2
Nice and easy to reach while driving :clap
 
That's really cool, and really neat!

Was it easy to work with?
 
That's really cool, and really neat!

Was it easy to work with?

Not too bad, I'm impatient though so struggle with sanding filler properly. I pop-riveted an aluminium box to the plastic, applied fibreglass and resin to get desired shape, sanded, filled, sanded, filled etc. I'm going to Flock it, like a RALLY CAR dash :D
 
Hi all, I've got an issue with my truck. It goes into limp mode or just reduces power.
Drives totally normal until I've stopped at lights or junction etc. and when I want to drive off the power has gone! Have to restart engine to get back to normal.
I thought it might be some fuel I put in that was causing it so I drained the tank and put some fresh fuel in along with some 2 stroke oil but it's still doing it. I think it might be the MAF, what do you guys think, any ideas? Thanks :D
 
Fuel filter would be my first choice, after that the mini filter if you still have one, is your Bosch or Zexel, Rick
 
Ik think both are a bargain comparing them with H&R spacers.

I've had good experience with Milners, they have supplied me some quality stuff, the drop links for front ARB have lasted for ages, that's why I will probably go with milners ones :thumb2
 

Latest posts

Back
Top