Latest project started Monday to keep me busy

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Canopy up, just got to push 250 mm duct onto old roof, then convert to 450 mm across old roof then up through new roof to connect to existing 2 Kw fan, also need to run new gas supply 35 or 42 mm, decide which once I have all the details of all gas appliances, plus an electric gas valve that will only enable the gas once a negative pressure is seen in the duct indicating the fan is actively running, all for today, Rick
 

Attachments

  • DSCN4990.jpg
    DSCN4990.jpg
    65.8 KB
http://uk.rs-online.com/web/p/produ...ntLvVyKhBsQMVYVXHvHfTVvwatR-6yyxoCL0UQAvD_BwE
Canopy up, just got to push 250 mm duct onto old roof, then convert to 450 mm across old roof then up through new roof to connect to existing 2 Kw fan, also need to run new gas supply 35 or 42 mm, decide which once I have all the details of all gas appliances, plus an electric gas valve that will only enable the gas once a negative pressure is seen in the duct indicating the fan is actively running, all for today, Rick
This is the type of differential pressure switch we use at the University on extract and AHU's. One 6mm tube either side of of the fan.
http://uk.rs-online.com/web/p/products/9069503/?grossPrice=Y&cm_mmc=UK-PLA-DS3A-_-google-_--_--_-&matchtype=&gclid=CjwKCAjwgvfOBRB7EiwAeP7ehlzM2tL6lH3CLYwD80Wf2QntLvVyKhBsQMVYVXHvHfTVvwatR-6yyxoCL0UQAvD_BwE
 
Bought a 50 Mtr roll off pipe earlier in the week, unwrapped it today with the intention of running it through a narrow ceiling void, only to find it is 15 mm not 22, so that job was abandoned
 

Attachments

  • DSCN4991.jpg
    DSCN4991.jpg
    59.1 KB
Started to clad a rear part of the dish wash/storage room so that it could be used for newly arrived crockery temporary storage
 

Attachments

  • DSCN4993.jpg
    DSCN4993.jpg
    43.7 KB
Route for CH pipes to raised deck area, customer is keen to keep pipe visibility in customer area to the minimum, these will be behind the steel column and under floor with only rad tails showing, other rads on lower customer area 3 number will be decorative rads
 

Attachments

  • DSCN4994.jpg
    DSCN4994.jpg
    65.6 KB
Ladies WC being tilled, all for now Rick
 

Attachments

  • DSCN4999.jpg
    DSCN4999.jpg
    69.9 KB

The controller I have been supplied with is simply a diff pressure sensor that detects lower pressure in the canopy side of the fan together with a current draw to the fan, yet to get a gas control valve till I know what size pipe I will be using, Rick
 
The only bit of CH pipe seen on supply run to raised deck area apart from feeds to rads
 

Attachments

  • DSCN5000.jpg
    DSCN5000.jpg
    55.3 KB

Latest posts

Back
Top