Search results

Hi makeitfit The difference between the swb and lwb is in the spring rate not the size of the actual spring. The lwb are a stronger springs so lifts the back of the car when fitted as thay compress less. Have you driven the car round to let the springs settle before measuring and tried turning...

Hi Spikey Welcome to the club If you do a search on insurance you will find lots of information try this link http://www.nissan4x4ownersclub.co.uk/modules.php?name=Forums&file=viewtopic&t=5960&highlight=insurance

Hi Giggsy BFGoodrich T/A KM Mud Terrain are one of the best all round tyres plenty of grip off road and long lasting on the road. Because your only changing two tyres i would stick with the same size you have now. You can go up to 265\70/16 with a bit of trimming any bigger and you have to start...

Now you've got me worried 60mm lift going on next weekend when i measured the bolts 150mm seamed long enough hope i measured them right. :?

Hi guys i sourced my bolts from this company http://www.namrick.co.uk/browse.asp?PCID=9 there Not cheep but it was the only ones i could find at the time.

Hi Ive fitted manual hubs and since fitting thay have been no trouble at all i purchased mine www.milneroffroad.com

hi CHASTER The breathers on these cars are well up to the job. I have a TD but i should imagine the tdi would not be to different. The front axle and gear box breathers join i to one and run all the way up in to the engine bay near the bulk head on the drivers side. The rear one has a pipe...

Hi mav found this in a previous post hope it helps http://www.nissan4x4ownersclub.co.uk/modules.php?name=Forums&file=viewtopic&t=4253&highlight=roof+rails

the mod has to be done in a very prosice way so there is no movement in the arms i have taken mine out 4 times off road with this mod and already there is ware at the pivot pin this is why i would go for one with the bearing at the pitot pin, the nylock nut on the bottom requires changing for a...

I have done this modifications to my car as i only use it for off road and this was the easiest to do and is more easily repaired i also changed the plastic inner part of the idler arm to bronze. I would not recommend this mod for road use but look at one of the more substantial options with the...

Hi NNMan Is this what you are looking for http://www.roadangelgroup.com/products/roadangelcompact/index.html

Hi Baxter Try Winch solutions thay have champion winches for under £300 http://www.winchsolutions.co.uk/index.asp?action=showproducts&catid1=0&catid2=5

I have both front and rear bars removed the only time i noticed any more body roll was when braking heavy and turning at the same time, braking in a straight line there is no difference as the roll bars would not be working anyway on the + side i have noticed more grip when accelerating out of...

hi try this company for wheel arch extensions http://www.roccia.co.uk/acatalog/Universal__flares.html

Hi If you do a search on torsion bars you will find all the information you require when lifting the front you need to leave enough room between the bump stops and the wish bones to allow for suspension travel when used daily so your not hitting the bump stops i wound my front up 1.5" see this...

Hi chumba Whilst you have the door panel off check all the rubbers in the window runners, My driver side rubbers are all perished inside the door causing the same problems your having.

Hi saurus1 i replaced mind 18 month ago and thay only cost £35 for them both from nissan and thay come ready bent.

tony2002 I have fitted 20mm extended LASupertrux springs, although when sat next to the old springs thay where the same length but lifted the back 1.5" when fitted, Ive also fitted Discovery dislocating cones these where 3mm to big to go in the spring so had to be ground down to fit...

are colway and greenway tyres the same company as i have noticed greenway tyres have been removed from a couple of web sites.

Adrian Flux do cover modded vehicles thay insured mine with larger tyres raised suspension and winch on the front