just wont start

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Your giving us duff details. No smoke probably means no fuel... also check the fuel stop solenoid is operating.
 
Enough already I'm going back to work. I'll catch up with the sorry saga later :lol
 
Your giving us duff details. No smoke probably means no fuel... also check the fuel stop solenoid is operating.

Duff details?....lol......

I said, theirs fuel at the injectors, just won't start
 
I never taken any fuel pipes off, and the primer is stiff as a stiff thing

Please just save us a lot of questions undo at least one injector try and start it if no fuel check to make sure wire is on stop solind on pump if it is check for 12v this is all very basic checks. Then get back to us simples:doh
 
Duff details?....lol......

I said, theirs fuel at the injectors, just won't start

How do you know, you just said you did not check there? Check then you will know 100%.

Fuel at the filter still means you got a possible issue from there - engine. :doh
 
Please just save us a lot of questions undo at least one injector try and start it if no fuel check to make sure wire is on stop solind on pump if it is check for 12v this is all very basic checks. Then get back to us simples:doh

That's what I'm going to do ! :rolleyes:
 
Have you got any fuel in the tank?
Ive heard you scotch are a bit tight with the old coinage
 
have you cracked off a injector yet?

Any update on this ? I was expecting to come home to a youtube clip of Toby driving around some private land :augie but no, just some Hi-lux action :nenau
 
nope haven't touched it, wasn't in a good mood earlier as it was pissing me off
 
Going to have another crack at it tomorrow, if it still doesn't work. I'm going to cover the stubborn _astard in petrol and pretent none of this ever happend
 
Charging the battery up and will have another go at trying to sort it
 
I think I've found the problem, the black and red wires on top of the primer pump aren't getting power. Is that for the cutoff? I honestly can't remember
 

Latest posts

Back
Top