Elty001's terrano project

[terranosaurusdoug]

Will see how it turns out.
No doubt a few trips on the lanes will soon have it back to the bush pin stripe look:thumbs:lol

:lol:lol:lol

 

[makeitfit]

I think it's great mate
Just a pain on scratchy lanes though I guess

 

[elty001]

One side finished.
I'm liking it more with every panel i do:thumb2

 

[elty001]

Just the mirror back to do to.

 

[Flying Torquewrench]

It certainly looks different! The jury is out if I like it though but it seems to be sitting nicely on the panels with no air bubbles.

 

[elty001]

Drivers side completely finished.

 

[elty001]

Passenger side is getting there.

 

[elty001]

Me and the dog had a bit of a juant out on a few local lanes today:thumb2

I think it's new jacket fits it quite well.

 

[elty001]

 

[elty001]

Decided it was time to finish and fit my panhard rod drop bracket.

 

[elty001]

Panhard rod sits nice and parallel to the rear axle again:thumb2

 

[elty001]

Bracket painted and re fitted and freshened up the panhard rod with a rub down and a coat of black hammerite.

 

[elty001]

I bottled out on wrapping the bonnet so took it into work,stripped it and powder coated it in fine textured matt black.

 

[makeitfit]

Nice work again matey . I'm going to do a drop box on the farm find

 

[elty001]

Nice work again matey . I'm going to do a drop box on the farm find

Nice:thumb2
I used 50x50x5mm box section for the chassis mounting point and 5mm plate for the panhard mounting point.it's a bit tight getting it up between the original mounting point on the chassis so medium sized persuader was needed to hit it home.

 

[makeitfit]

We have a drawer full of persuaders I'm sure one will be just right

 

[elty001]

Been a while since i did much on the terrano.
Bit of pre mot work when i can get the time off and the weather is on my side.

Managed to repair the rear section of the passenger side sill.

 

[elty001]

Got some shiny bits to fit.
Refurbished set of rear trailing arms complete with new bushes.

 

[elty001]

Refurbished brake calipers and a set of braided brake lines from pioneer 4x4

 

[elty001]

Still having a few issues with the auto box when cold but that's a job for the warmer weather.