Elty001's terrano project

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Me and the dog had a bit of a juant out on a few local lanes today:thumb2
20210418_175344.jpg
I think it's new jacket fits it quite well.
 
Bracket painted and re fitted and freshened up the panhard rod with a rub down and a coat of black hammerite.
IMG-20210502-WA0009.jpg
 
I bottled out on wrapping the bonnet so took it into work,stripped it and powder coated it in fine textured matt black.
20210425_113204.jpg
 
Nice work again matey . I'm going to do a drop box on the farm find 😉

Nice:thumb2
I used 50x50x5mm box section for the chassis mounting point and 5mm plate for the panhard mounting point.it's a bit tight getting it up between the original mounting point on the chassis so medium sized persuader was needed to hit it home.
 
Been a while since i did much on the terrano.
Bit of pre mot work when i can get the time off and the weather is on my side.
IMG-20220211-WA0015.jpg
Managed to repair the rear section of the passenger side sill.
 

Latest posts

Back
Top