"Terrance" - 04' Terrano II SE Commercial 2.7TDi Project Thread

[Barrbeast]

when I felt robs

You loved feeling mine :sly

 

[Banshee]

You loved feeling mine :sly

Stop filthing up my thread!!!! :bobby:

 

[Banshee]

I've had my springs for my b'day :thumb2

 

[Sweety]

I've gone for Green but Robs were Black (same price) , when I felt robs compared to the Argos crap in mine I was stunned!!!!

http://www.ebay.co.uk/itm/Town-Coun...hash=item5676b21926:m:mf9ZfxDncqgNrzHesleXFMw

Sadly they aren't any good if you have seats with airbags in:augie

 

[elty001]

I've had my springs for my b'day :thumb2

You still not fitted them yet:lol :lol

 

[Banshee]

Sadly they aren't any good if you have seats with airbags in:augie

Mine dont have side airbags in :thumbs I swapped them for an earlier set in mint nick :naughty

 

[Sweety]

Mine dont have side airbags in :thumbs I swapped them for an earlier set in mint nick :naughty

I know you have but thought i'd mention it incase those with seat air bags went to get a set of covers like yours not knowing you have changed your seats because if the seat air bags went off the seat covers would stop the bags going in the correct direction & force the bags to inflate into your side or back causing bodily damage:doh

 

[Banshee]

I know you have but thought i'd mention it incase those with seat air bags went to get a set of covers like yours not knowing you have changed your seats because if the seat air bags went off the seat covers would stop the bags going in the correct direction & force the bags to inflate into your side or back causing bodily damage:doh

That's a good shout!! I'd hate to be responsible for something like that

 

[Banshee]

2" Lift Springs Fitted

So I've now removed the LWB springs and fitted my 2" Lift Springs :thumb2

LWB springs on left and 2" Lift Springs on Right

The front is now an inch lower than the back, I'm going to take it up and inch and a half at the front to just help that bit more with clearance for the 33's :naughty

33's on this week maybe :nenau

Depends if I get my arse into gear and get the torsion done this evening :bow :bow

 

[jims-terrano]

Nice Made a difference haven't they. it'll be nice to see the front wound up and those 33s fitted.

 

[Banshee]

Nice Made a difference haven't they. it'll be nice to see the front wound up and those 33s fitted.

Yes it bloody will :doh :lol
I've been going as fast as I can (money and time permitting) :doh

 

[Banshee]

General Stance

Just a nice shot of the car how he sits at the moment :thumb2
The eagle eyed ones amongst you will notice a large gap between bumper and body again, yes this is still work in progress, I'm currently beefing up bumper supports :thumb2

 

[elty001]

So I've now removed the LWB springs and fitted my 2" Lift Springs :thumb2

LWB springs on left and 2" Lift Springs on Right

The front is now an inch lower than the back, I'm going to take it up and inch and a half at the front to just help that bit more with clearance for the 33's :naughty

33's on this week maybe :nenau

Depends if I get my arse into gear and get the torsion done this evening :bow :bow

don't overdo it with the torsion bars or it will be like driving a go cart,about 1/2 inch lower on the front is about right.

 

[Banshee]

don't overdo it with the torsion bars or it will be like driving a go cart,about 1/2 inch lower on the front is about right.

I'll go same height all way round I think then just so it lookls right to the eye :augie

Go carts are fun anyhow :naughty

 

[elty001]

Just remember that when you have some weight in the rear the front will be pointing at the sky.
Trying to drive it when it's too high on the front is a major task :lol

 

[Sweety]

TBH front should be lower than the rear due to weight transfer when pulling away as the rear end will squat down a bit, if it's level the front end will lift & effect the steering also handling will be effected which will show up more due the the all round lift. Personally I would have the front 0.5-1" lover at least & that's still less than the difference of a standard truck with the torsion bars set right

 

[Blocky10]

Personally I would have the front 0.5-1" lover at least & that's still less than the difference of a standard truck with the torsion bars set right

mmmmm. 1" lover...... other things on ya mind? [emoji13]

Ian

 

[Banshee]

Well I'm already an inch lower at the front, I'll try it level all around and if it's an issue I'll wind it back down :thumbs2

Got it on ramps last night at the local petrol station and jet washed the underside as there was still some compacted mud hiding away from the laning weekend :lol

 

[AlexD333]

yes defo slightly lower on the rear, did this myself, had it really high on the front at one point, when you hit dips on the motorways you S**t your pants as there is no downward travel

looking damn good btw

 

[Sweety]

mmmmm. 1" lover...... other things on ya mind? [emoji13]

Ian

:doh:doh:doh The joy's of being dyslexic plus had taken my pills & a load of pain killers for my broken ribs stopped the brain working more:lol:lol