Lift injector, Am i suposed to get a reading

[JimmyJaffa]

Could someone please please tell me if i am supposed to get a reading across pins 1 and 2 on a lift injector because i have had a new one delivered and it reads open circuit. I've read on CD manual EC430 that its should be 105 ohms, just don't want to look a twonk if i send it back and its o.k,

many many many thanks for any info :bow:bow:bow:bow:bow:bow:bow:bow

 

[rayf3262]

Could someone please please tell me if i am supposed to get a reading across pins 1 and 2 on a lift injector because i have had a new one delivered and it reads open circuit. I've read on CD manual EC430 that its should be 105 ohms, just don't want to look a twonk if i send it back and its o.k,

many many many thanks for any info :bow:bow:bow:bow:bow:bow:bow:bow

Bosch injectors use an inductive sensor (coil) which should read ~100 ohms or so.
Zexel injectors appear to use a piezo sensor, these will not show a DC reading with a meter; they will appear open circuit. A scope would probably be the only way to verify if it is working correctly.

 

[tezzer]

i changed mine when a fault code came up, it was a bosch and the reading was 98ohms, and it works perfectly and made a vast difference. :thumb2