Latest project started Monday to keep me busy

[solarman216]

Back part of wash room with walk in fridge, opening to the rear left is a walk in freezer

 

[solarman216]

Freezer, this is coming out and new gents WC in its place with wall accross this opening

 

[solarman216]

Disabled WC, to the left is the back wall of the walk in freezer, a new door will be made here

 

[solarman216]

Bits for lecy to sort, nor too bad this time

 

[solarman216]

sorry this is crank your head job

 

[solarman216]

Old canopy and ducts to go

 

[solarman216]

Some old kit some new, till it is sorted this will be a storage area for now, to have a raised seating area with fancy railings around, several curves involved I am told

 

[solarman216]

Old fryer got to be out Fri/Mon ANY OFFERS CHEAP

 

[solarman216]

All the old floor boards to be over laid with 18mm ply all 25 8 * 4 sheets of it, hope to start that on Monday then we can start fabricating the bar, but that fryer has to go, well that is all for today, Rick

 

[zippy656]

Looking good Rick!!

 

[solarman216]

Spent the whole day dismantling that fryer, went off for the trailer and it pissed down, so forgot the idea today, and even if I wanted and I dont, could not do it tomorrow as road is shut Sat and Sun due to French market, so Monday will be a busy day, Rick

 

[Banshee]

Spent the whole day dismantling that fryer, went off for the trailer and it pissed down, so forgot the idea today, and even if I wanted and I dont, could not do it tomorrow as road is shut Sat and Sun due to French market, so Monday will be a busy day, Rick

You sell the fryer in the end Rick?

 

[solarman216]

No Zac, once I started to take it to bits discovered that all the bolts were "whitworth" so how old is that? whitworth and BSF came before UNF and UNC and we have been metric for years, no wonder when owner put it on Ebay for 0.99p it attracted no bids, but I now have lots of SS with some nice folds which I am sure will come in handy later, plus loads of SS scrap which at £450 a tonne is good,Rick

 

[Banshee]

No Zac, once I started to take it to bits discovered that all the bolts were "whitworth" so how old is that? whitworth and BSF came before UNF and UNC and we have been metric for years, no wonder when owner put it on Ebay for 0.99p it attracted no bids, but I now have lots of SS with some nice folds which I am sure will come in handy later, plus loads of SS scrap which at £450 a tonne is good,Rick

Fair play :thumbs

 

[Blocky10]

Loving the thread Rick :thumbs

 

[solarman216]

Not much to see today, spent my time moving all the scrap (two trailer loads) from the shop to the yard, so now we have a bit more room to move around, Kieth and his mate screeded the new kitchen floor, pics tomorrow,Rick

 

[Banshee]

Lovely trailer Rick!! That yours or you hire it?

Sent from my SM-G930F using Tapatalk

 

[solarman216]

Not mine, it belongs to Dave who rents a part of the yard for scaffold storage, no pics today as did another trailer load with the two canopies that were still fitted and some more ducting and hard core, prior to that removed the walk in freezer and transported it to a shop two streets away, had intended to reassemble it today but they needed time to empty the chest and upright freezers to make space, so came back and did the canopies while the trailer was available, yet more to the SS scrap pile, Rick

 

[solarman216]

Floor screed that went down Monday

 

[solarman216]

Old canopy removed, ceiling shot