Engine Stall

[spautoparts]

i was sat at traffic lights today getting impatient so i decided to give my T2 a rev. i didnt razz the balls off it just bliped it a couple of times to about 3000 rpm. as the revs came down it stuttered and then stalled.
it started straight back up no probs but the management light came on for a while and went off again.
is this normal or should i investigate?:nenau

 

[solarman216]

read your fault codes, if the light came up there should be a code and even though it has cleared it could be a sign of something that may fail soon, Rick

 

[clivvy]

no its not normal, yes you should investigate, as rick says, read the fault codes as it should have logged what the issue was at the time!

let us know:thumbs

 

[spautoparts]

Ill do it this weekend while im fitting a new exhaust, replacing 2 front brake hoses, changing a track rod end and sorting the binding back brakes.... GRRR MOT

can someone remind me which pins i bridge on the diagnostic plug... cheers

 

[solarman216]

holding the plug with the chamfered end to your right, on the bottom row short the two left most pins for 2 seconds, Rick

 

[spautoparts]

holding the plug with the chamfered end to your right, on the bottom row short the two left most pins for 2 seconds, Rick

nice one... cheers mate