Search results

That top bolt is murder to get at. After a lot of looking in through the wheel arch and wondering how the hell I'm going to get this loose, I think the bottom bolt may have sheered. Not 100% on that and wont know until I get top bolt loose but the bolt head is hard up against the flange of the...

Your name is arrogant arse, i'll fix the starter myself with my limited knowledge of vehicle mechanics Thanks to the other guys for sensible un patronising advice, thankfully not everyone that uses the forum has the kind of opinion that Mr Anyone has. :D

Hi guys my starter has gone capuut this morning, is this something i could do myself if i bought an off the shelf motor. I don't generally do much vehicle work and am wondering if i'd be out of my depth with this. It is def the starter before anyone asks. I found a walk through on youtube...

I'll do the clutch test when i get home today. Truck has done just over 72,000 miles.

This was done on the last service and not that long ago. The garage i got it from had a load of invoices for all the work they had done on it for the previous owner. He took it to same place all the time for servicing and MOT etc. I had an escort many moons ago that required a new clutch for...

I was away with the caravan for the first time this weekend with my 2003 2.7SE Terrano LWB. I noticed immediately that when i accelerated for a hill, my engine revs are going up but the pulling power seams to be lacking. So i would have to lift my foot off a little to let the revs return to...

Radio / Hazard switch Finaly sorted my hazard problem out as driving around without them was beginning to anoy me. The smaller of the two plugs that goes into the back of the radio controls the hazards, i read on here somewhere that the two wires you need are the green/red and the black. Before...

You dont happen to have a Radio Fascia with the Hazard switch above the radio and not built into it.

I think I might have to as £100 quid is a bit steep. Has anyone done this and how did they do the Hazard wiring. What I need here is a detailed descrition of what wires to use. Electrics is not really my thing. :nenau

does anyone have for sale a radio facia, the one with the hazard switch above the radio. http://www.ebay.co.uk/itm/NISSAN-TERRANO-2-CD-RADIO-STEREO-FASCIA-PANEL-WIRING-HAZARD-SWITCH-1999-2005-/150961085271?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3ATerrano&hash=item2325fb5b57 A bit steep...

:thumbs

The condensation was from leaving the dogs in the back with no windows down. It was pissing with rain though. Lesson learned. :doh

Ok a final update, after speaking to an auto electrician who said this could be down to condensation build up. I replaced the thermostat which i had an idea was needing done as the temp gauge only went up by a quarter and topped up my coolant. I also put an electric blower heater that i use for...

Ok it's the Meter fuse that is blowing causing the dash to stop working. It has blown a couple of times now and I have no idea why. I recently installed a 12N socket, I did this by tracing the correct wires and soldering the 12N wires into the harness. Everything worked perfectly once hooked up...

Thanks guys I think I have a few things to check out, but I don't think this is going to be the easy fix I was hoping for.:thumbs

Hi guys, hope someone can help with my ignition problem. I have a 2003 Terrano that had been running fine until i got back in after stopping at a shop. I put the key in and no ignition lights, but the truck fired up no problem. Things not working are Rev dial, Speedo dial, Led's for mileage and...