Radio / Hazard switch
Finaly sorted my hazard problem out as driving around without them was beginning to anoy me. The smaller of the two plugs that goes into the back of the radio controls the hazards, i read on here somewhere that the two wires you need are the green/red and the black. Before i started splicing into cables i stuck a peice of wire into where both the coloured wires go into the connector/plug, touched them together and Bingo!!!:thumbs Flashing lights. I used two cable splicing thingy's to attach a two core cable to a hazard switch and inserted it into plastic just behing my indicator stalk. (Room for two switches here). Now i am left with a big hole once my after market cd player is in. I solved this by using a black plastic divider from one of my recycling boxes (they came with these to separate cans and bottles i suppose). After some careful measuring and cutting with a stanley and a bit of filing, my new facia looks good, my hazard switch works fine and it didnt cost me £100 off ebay which is what the facia with the built in switch does. Im a happy Terrano owner. I still fancy doing roof lights and i want side steps too. :clap
could also use MDF
