Search results

Job Done. I used one of these (you only need 1) http://www.ebay.co.uk/itm/271143300843?var=570138193373&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1680wt_932 The length needs to be trimmed to about 10mm. I used a bench grinder. A vice and a hacksaw squashes it. If you have a dremel...

Exactly. how many do we need ? is it 2, i.e. 1 for each end ?

I had the same issue, turned out to be a cracked battery connection on the + side, common fault apparently. There's a post about it.

Women made ?! I'd be interested in getting a couple

Think I might have found a solution, either this http://www.ebay.co.uk/itm/271143300843?var=570138193373&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 or this http://www.ebay.co.uk/itm/170995433691?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 or even this...

Thanks all great ideas. But there still another BUT. It's OD is 10mm and I'm trying to create an id of 8mm.Too much pressure to hold it tends to squash it into and oval shape ! How about heating up the other end of an 8mm bit and trying that ?

Possibly. They have a pillar drill I know for sure. It's being able to grip the little blighter that's the issue without roughing up the outer part of the bush. thanks

Any Ideas ?

Bushes and Hats etc etc OK, so I bought some of these. Only trouble is , how to hold the bush while drilling it out to 8mm, tried 5,6 and 7mm first but can't hold the nylon bush, too much torque to hold it . If you use pliers , they just shred the outside of the bush. Hold it too tight and...

Bushes I had been looking at solarman216 's entry on page 2, where he's refers to the top hat bush and assumed there was only one. Confused

Oops, this one http://i1061.photobucket.com/albums/t471/Melissa_Mackenna/terrano%20stuff/Scan0001_zps90a04004.jpg

Thanks fior that, but still not sure if I need two bushes according to the diagram. http://i1061.photobucket.com/albums/...ps90a04004.jpg

Bushes I have the same issue with my Clutch pedal too, have to put my foot under to return it to the full position. So, it looks like I need two of these bushes , is that right ? http://i1061.photobucket.com/albums/...ps90a04004.jpg...

Front Wings Probably won't be the first to ask, but are the front wings OK and how much ? thanks

Took the door switch off and thought I could just swop it for a rear one. But no, they are different. So took the drivers side one apart and sure enough the spring had broken at the end. so I stretched the spring to make up the difference in length , cleaned the contacts and put it together. I...

Lights on/keys in Ignition Buzzer/beeper My buzzer has stopped working, so possibly mistakenly thought it might be faulty so got another one from a breaker, but still doesn't work. soooo, 1. How can I test the buzzer ? 2. Checked all fuses and all are Ok , any other ideas ? Thanks

ARB Job done, Won't bother and as I don't do any extreme off-roading , not likely to be an issue then. thanks for that.

ARB Bushes Replaced the bushes both sides yesterday using the download link and the help from this thread. Thanks to all. One question though. In the download guide it says remove the bump stop to aide access. This was easy as mine were missing ! So, Where do I get new ones, I guess this...

Bushes Thanks. Should I have added they are the Front ARB bushes and it's a 98 Terrano.

ARB Poly Bushes Just bought some replacement bushes. The four small ones are quite obvious where they fit, but is there a wrong or right way (or again is it obvious !) to fit the two larger ones ? thanks