Search results

well brakes done now new shoes and pads and wheel cylinders and brake lines as they wouldn't come off the wheel cylinders . plus sorted the seized pins on the front .

thanks I asked my mate and he thinks I am missing a spring

can anyone tell me if there should be a spring on the auto adjuster or show me a pic of the inside of the rear brakes . because the L shaped arm looks like it just hangs there on the left hand brake shoe .

I think your right as it is connected to the orange wire on the loom be hide the rear left bottom light cluster with the red . then goes to the relay then the yellow comes out of the relay and goes to the other connecting block and a brown which is earth and a red/yellow wire that I think goes...

the wire's coming out of the connector block are red, yellow, black and a brown if this helps

I think its a flasher unit . I have ripped it all out and found half the wires showing bare wire . so I have cut them all off and using blocks to join them back up as solder won't take hold . then I will put it back

this is the other side. I have attached the wire because the earth clamp has broke . it has something to do with one of the tow bar sockets

do anyone know where I can find a replacement like this relay

hi all my indicators keeps blowing fuses. but just before this happen when signalling we hear a beep . so I think it has something to do with the towing's 2 sockets wiring . so I have had a look and there seem to be a relay with a earth clamp just hanging there wrapped up in a bag connected to...

since I have changed my oil . I went out today and when it's cold I can't get 1st into 2nd gear unless the car has stopped moving or 2nd to 1st . would this be the box knackered or on it's way out . I was thinking if the bloke I brought it from over filled the box so much to make the gears...

I have no idea it wasn't me . we just changed it today because it was starting to whine when the box had to work hard . so I had just under 4ltrs of oil to put in out of a 5ltr container and all that went in then I thought I would pour the old back in the container and it filled that and left...

I know the amount as I looked in the workshop manual . it says 3.6ltr . what I trying to find out is would over filling it by 2ltrs cause any damage if so what ?

i just changed my gearbox oil after 2 years . so I found this site saying it takes 3.5ltrs of ep80w-90 gl4 . but when I drain it I took out about 5ltr container and I have about half ltr left in the oil tray . what damage would that of done to the box...

thanks for all the advice sprayed wd40 in the towbar sockets and had a dry day yesterday . no the interferences has stopped and no beeps . so I hope it was just water and road salt getting in

would that make the fuse blow and interfere with the radio ?

I have a mot coming up in 2 weeks and all of a sudden when I put the indicator on to turn right or hazard lights on it interferes with the radio and twice I have heard a single beep like when you leave the lights on and get out and keeps blowing fuses . I think it could be a bad earth but can...

look at my truck it's the same colour and shape just with roof bars and cream leather interior . the last 3 letters of the reg is hft . he say it has 4 fairly new tyres on it that's why it's £1000

hi guys I know some one that trying to sell their t2 tdi se+ 2001 maroon colour. it has 170k on the clock. it has no rot apart from the front wings starting to bubble above the trim front drive seat ripped all open and he says weeping fuel tank . I call it fill it above half and it leaks a lot ...

I fixed mine nearly 2 years ago now with tiger seal and some clear 6mm tubing to thread inside the old seal on the hinge side and door lock side and re seated the old seal at the same time and placed tiger seal along the rubber thats on the body at the top and some under the foot plate and...

exosteve make sure that the bottom ball joints are right as there are 2 different lengths and it makes all the difference between driveable and not . its from the bolt hole length between the nearest bolt and the joint . there about 20mm difference in length