Search results

Hi guys my mate has bought a 2.7 td mav and the brakes are shocking :eek: The pedal just sinks straight to the floor upon braking !!!!! When he turns the car off and pumps the brakes the pedal goes hard then when switching the ignition on they slowly creep down ? Also when pumping the brakes...

. Let us know what you think guys

. Rear clearance mod

. Another pic with the 33's and 2" bodylift

. Just an update on the truck and testing to see if I can use photo bucket

. Good question I'm not sure what the offset is I think I'll wind the front up aswell The wheels are modular wheels and they are wide and stick out about an inch from the wheel arch. If I wind the torsion bars up a bit and it still catchs how much can I whack the inner seam/ arch ? I would...

Hi guys fitted my 33's today and they catch on the inner wing when turning I've whacked the seam in already because my 31's also had the same problem but I've got a 2" body lift and 2" suspension lift I thought they would fit no probs ? How far can I whack the inner wing on the corner in ? I...

hi guys ive found a psi powerbox for sale but the wiring loom is not for a terrano but can i order the correct wiring loom for it or will the box be car specific or are the psi powerboxes just resistors in one way or another ?

. It looks like a shogun rad in there and the top rad outlet goes to the thermostat connection by the alternator and the bottom rad outlet goes to the thermostat connection by the power steering pump Sorry guys for the dodgy description but I'm sure it won't do it's job as a rad correctly...

. Will it affect the heater in winter with regards to warming up ? So the rad now cools bottom to top instead of top to bottom ?

. It's already fitted too the truck at least we think its of a petrol as the top rad hose is on the right handside of the rad and it goes into the passenger side of the thermostat effectively the rad pipes go to the opposite of where they should go Will that cause any probs with cooling or...

. If your rims are 7" wide you should be fine I done the spring lift to start with and I had 31 x10.5 x15 on hilux rims which has more of an offset than standard and mine didn't rub but I had to remove the mud flaps and whack the inner wing seal flat As for xpajun spacers they are very good...

Hi guys my mates maverick has the radiator round the wrong way is that a problem ?

. Ok so if the rad is the wrong way round and connected as it is is it a problem ? I will check the mini filter too It the rad that's concerning him the most

Hi guys a mate of mine has been given a maverick 2.7td but it has a few issues that need sorting It won't rev past 3000 rpm even when on idle The brake pedal sinks to the floor The rad has been changed and the the top rad inlet goes to the right hand side of thermostat and the bottom hose...

Guys I seem to have negative camber on my o/s wheel after lifting my truck and it's dragging the steering around I've replaced upper and lower ball joints track rods and also have makeitfits steering mod which is the bollox ! But when I tried to have the truck tracked after all the suspension...

. Glad you mention castor coz the caster is slightly out too I was going to get a couple of big washers and put them in there just have to make sure they aren't too thick Did u get my pm pete

Hi guys I have negative camber on my off side wheel and need to put some shims in do I have to completely remove the bolts ? I take it you do one at a time ? What size are the bolts that the shims will need to fit on ?

. What is easier to undo it with ? Spanner or socket ?

Hi guys what size is the nut on the steering box which holds the steering arm on ??