33's fitted but they catch on the wing ..??

[niks_terrano ii]

Hi guys fitted my 33's today and they catch on the inner wing when turning I've whacked the seam in already because my 31's also had the same problem but I've got a 2" body lift and 2" suspension lift I thought they would fit no probs ?


How far can I whack the inner wing on the corner in ?

I looks like it needs to go in by at least 3/4 of an inch by the looks of things

 

[makeitfit]

Are sure it's level up front? 2 + 2 will be loads a room :nenau
What offset wheels you runnin'?

 

[niks_terrano ii]

.

Good question I'm not sure what the offset is I think I'll wind the front up aswell

The wheels are modular wheels and they are wide and stick out about an inch from the wheel arch.

If I wind the torsion bars up a bit and it still catchs how much can I whack the inner seam/ arch ?

I would take some pics but not sure how to get them from my phone to my iPad to on here

 

[stinka]

Whack it as much as you like, it's not critical, have u cut the end of the sill off too yet ?

 

[makeitfit]

Why bother putting pics to your ipad and then here ? Just send straight from your phone to say photobucket, then link directly from there, simples.
Inner wing seams can be totally flattened, and maybe trim the lowest part of the wing as it comes down to the sill. You'll see 2 bolts holding it on at the bottom. Cut back to the last bolt. That'll give you plenty of room, my 35s fit
It is possible to have too much offset and be catching the wing and not the inner gubbins like steering box etc
You shouldn't need to cut the front of the sills for 33s