Search results

There is a member on here who's had to replace the MAF twice in 2 years. (Arthur) PM him for info. Never heard of a Hitachi failing always seems to be Bosch. Yes you can't interchange them, before anyone asks, different systems. Nissan will tell you its one of the most common problems on a...

Door seal or coming in under the plastic trim at the rear of the carpet. Take plastic trim off, run a bead of sealer under it and refit. I had to change the door seal on mine as it went flat.:doh Got one from the parts gateway. :)

If your engine has an EGR. Looking at the car from the front with bonnet open. Its at the back of the Cylinder head on the inlet manifold (left). If I remember right its very hard to get at. I also remember somewhere that most EGR's were fitted to Hitachi Maf engines and zexcel pumps, not...

Don't know about the Vectra MAF:nenau If you phone round some Nissan Dealers you can get the MAF for £30odd:thumb2 if its old stock they will be looking for £80ish:doh If the MAF was 100% and you unplug it you will notice the difference. T2's can be lively in the wet, rear end stepping out...

MAF, U/S don't waste time and effort cleaning them:)

Yes does make you think when some company can sell them at £40 odd a pair and OME are £70 each:nenau need to get a price for IronMan and some info. Nissan want £150 each for the front and £170 each for the rear:eek: So what does that say about the cheapo's:eek: suppose you only get what you...

Had car at nissan and they can't find a problem, what a shock:nenau other than If I hadn't changed the springs it would be the springs:augie Just been speaking to TBR about OME springs and as Dadba says the drivers side on front and rear are slightly longer, maked A for drivers and B for...

I know what you mean, but looking at the way the radius arms are connected to the front axle, 2 bushes on both sides(top&bottom of the axle) , if both are worn on one side, it would allow the axle to rise on that side and lower that corner, if you know what I mean. I'll need to get it up on...

Tyre pressures are ok and the fuel tank is in the middle similar to the T2. It feels like a soft spring when towing the van. Whats bugging me is it sat like that before I changed springs and shocks, that how I changed them. My suspision is its a problem at the front thats causing it:nenau...

Right here's an update on what I've done. Disconnected front ARB (both drop links) Disconnected rear ARB OS link and stabiliser disconnected No change in heights:nenau Then when ARB's out of the way, disconnected front and rear panhard rods, no change on heights:doh So car is sitting...

Turned off electronic stabiliser on rear ARB, it disconnects the nearside, that made no difference. Will do the front now :thumb2

Will give it ago. Not long after I got the car nissan changed ARB link on offside rear, hope they put the right one on??? the other side is the connection for the electronic stabiliser on the ARB :thumb2

Sorry for starting a new thread but the title of the other thread is about shocks. Here goes:nenau Right a while back I noticed the my trol was sitting about an 1" low on the rear offside:doh Ok thinks its a sagging rear spring. Get new springs from Milner (standard ride height 20% stronger...

On mine it ain't the springs as they've been tried on both sides:nenau Think I'll need to check all the bushes as its lower at the rear offside 1/2" and the front nearside 1/2" higher:nenau don't know if its the front or rear the is causing the problem:nenau :doh I'm going to disconect the...

Did you find out what the problem was? Did you get it sorted? I've changed the springs round on mine and it still sits slighlty lower on the offside, its starting to really bug me now. :thumb2

Cheers Dave:thumb2 forgot about them:nenau I usually use town & country in grangetown for tracking. :D

Dave where did you get that done? My Trol has got a bit of wobble @60 and it drives me nuts after a while:doh or I just go faster to get out of it:eek: and use loads of fuel:doh :)

Dave, the front of your new van will be stinking:lol Make sure the front window seals are sound:nenau When you stop in layby's you might get peeps chapping the window for burgers&chips etc:lol:lol Sorry couldn't resist that one:doh I must admit you've got bottle to run long term on...

The wife loves ours because I do all the cooking:nenau great bit of kit:thumbs

Anything that lets more air into the engine must be a benefit, but as said in it minimal:thumb2 Where abouts you talking about? I got mine from Falcon Performance in Teesside at a decent price fitted:clap It does make a big difference:D