Search results

That is a tough looking Terrano.

Drained my system recently and tried to get the drain block but didnt like the look of all the turbo bolts. I did remove my water pump and when cleaning up I blasted air down one of the water ways and it blew a load out of the other channel. Now wether thats correct or not still removed alot...

Can anybody recommend a sealant suitable for use on an engine. I need to seal my modded cps sensor to the gear cover as its weeping slightly. Got the genericl pu sealants in the garage but have no idea on their resistance to oil. Heres the spacer that was on their but was already leaking...

Yeah that will be hard without the tools. Maybe the shape can be formed from three lengths of flat welded along its length to for the triangular channel? Then that can be attached to the car. Lots of welding but you would only need to worry about cutting it and wether your welder had enough...

If you taking all of the sill off would it be worth considering replacing with stainless steel if you can get hold of it. Makeitfit and Rick both mentioned forming it in a triangular shape channel point down i think. These would then act like semi sliders and protect the body. You can weld...

Thanks Rick. Ill get that swapped this weekend.

Looks like you have some really good equipment at your disposal. Great job

Squeezed my phone in there and im quite sure its the cps that is the source of the leak. It has one bolt on the right and the rest of the unit has been sealed in with a mastic of sorts as it has had the original modded. Ive seen a post by rick were he turned up a piece of brass to make a nice...

Changed belts, re fit everything, filled and bled the heating system. Then out for a nice long drive to see if I can find the leak. It was apparent straight away but i could see a couple of newly greasy bolts on the water pump so out with my handy inspection mirror

Aldi paint does hide alot of sins.

The cross member under the rad will need changing in the future so gave it a quick tidy up. Just till i get a chance to fab something up.

Now dont remove ur waterpump without having some gasket to replace it otherwise you might end up having to improvise. Not stolen from pete and his diff at all.:lol

I even romved the ac pulley to get behind it, water pump off as i wondered if it was weeping and collecting the oil as it ran down. Cleaned behind the pulley as best i could.

Lots of scrubbing later and she shined up very nicely.

Looks like it had been building up for a while. So out came screwfixes finest degreaser, brushes and a pressure washer.

Shes a dirty girl under all that body work.

With the rads out made it so much easier to see and have a chance to clear the muck out. Rather than smearing it about

Now was a good time to rip all the a/c business outto help with weight reduction :D

Started to undress the mav with sone free time this weekend.

Saw this on ebay. Looks like it would make a fun little run about. So how many Terranos do you have now? I mean worse case you could always adapt the lpg system for your silver truck.:D:D