water pump

[bobhope]

looking for a water pump for my 99' 2.7tdi . just rang round a few local suppliers . all quoted around £80 . just looked at euro car parts similar price but have 25% . anyone recommend .. thanks Dave

 

[stinka]

Do a search of my recent threads, I had one off eBay for £70 iirc was a QH part and the cheapest one from a decent manufacturer I could find

 

[stinka]

Here u go, these are the ones :

http://item.mobileweb.ebay.co.uk/viewitem?itemId=330640335369

There's a different one for earlier Terrano but I'm pretty sure this will be urs

 

[Banshee]

Here u go, these are the ones :

http://item.mobileweb.ebay.co.uk/viewitem?itemId=330640335369

There's a different one for earlier Terrano but I'm pretty sure this will be urs

Take it that one won't fit a 96' Mav 2.7TDi?

 

[stinka]

Take it that one won't fit a 96' Mav 2.7TDi?

No but they do both

Edit: it may do, have a look at the picture

 

[bobhope]

Thanks for replys guys . ordered pump . gasket not included , I was just going to use sealant , is a gasket necessary with sealant ?

 

[stinka]

Thanks for replys guys . ordered pump . gasket not included , I was just going to use sealant , is a gasket necessary with sealant ?

Scrape all old gasket off block, then use some emery cloth to get rid of pitting, I also use brake cleaner to get it really clean. Degrease new pump face with brake cleaner also. Then use a thin smear of copper rtv all over both sides of gasket and when tightening up do it bit at a time in a diagonal pattern from side to side

 

[bobhope]

Scrape all old gasket off block, then use some emery cloth to get rid of pitting, I also use brake cleaner to get it really clean. Degrease new pump face with brake cleaner also. Then use a thin smear of copper rtv all over both sides of gasket and when tightening up do it bit at a time in a diagonal pattern from side to side

Thanks for info . so would you not use sealant

 

[stinka]

Scrape all old gasket off block, then use some emery cloth to get rid of pitting, I also use brake cleaner to get it really clean. Degrease new pump face with brake cleaner also. Then use a thin smear of copper rtv all over both sides of gasket and when tightening up do it bit at a time in a diagonal pattern from side to side

^^