Vito Camper project

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Did a bit more carpeting in the sunshine :D Not the best plan as the glue dries way too quick :eek:


Here you can just see the quick release things I got so the pod can be taken in and out without tools :thumb2 They're little chrome clip things meant for fitting spoilers and the like to track cars :cool:


Close up. Sorry about the extra holes but I made a mistake :doh Nevermind a hinge will cover up :augie
 
BOOM sub update ;)

Look what came in the post from uncle eBay :D

Vibe 8" active sub in a box thing , £ 50 ker ching :thumbs I shall diss-assemble this and makeitfit my center console :cool:
Innards exposed and cut free.

A quick spin round with Mr Router and one hole for the speaker .

Innards transposed to the center console .

Loads of room :D Just need to avoid spillages now :augie

If it becomes an issue being exposed like that I'll probably fit a speaker grill from Maplins or something :rolleyes:
Battery no2 on the way next :whip:
 
I got the 2nd battery in today and just used a tie down strap to secure it :)

Smart split charger thingy

I'm using an Anderson plug to take power to the pod and also allows other accessories like tyre pump to be plugged in.

Got a nice fuse holder with LED indicators for each working fuse . Wired it up to the Anderson plug via a mini loom . Also fitted my old inverter for those mains needs :nenau

The sub in place and the axillary 12v outlet powered up with a little blue LED ;)

Modified the dash to take the sub remote and also fitted a little push button to isolated the sub amp from firing up when not needed.

Should be ready for winter camping :lol
 
The wiring to the sub amp looks rather thin TBH you should really be using 8 AWG min I would keep an eye on how hot the amp gets as there isn't really any cooling for the heatsink
 
The wiring to the sub amp looks rather thin TBH you should really be using 8 AWG min I would keep an eye on how hot the amp gets as there isn't really any cooling for the heatsink

Yeh I wondered about the cooling. As yet I've not bolted down the lid as I stick my hand in every now and then for a quick feel :lol So far it can best be described as warm. :nenau
I knew you'd mention cable size :augie However in my innocence I've used a bigger supply cable than the wires the other side of the connector inside the sub :thumbs
The supply cable is also all of 60 cm long . Do think that's really an issue ?
Easy to change mind but do I really need to ? It's only a 900w peak thingy or 300w RMS
I kept the amp the right way up this time though :thumbs
 
liking this so far, looks like its gonna be awesome once finished
 
We are off to the NEC caravan show tomorrow, Have a look at some of the toys on show.
 
This is in my subscribed list! Any updates?

Thanks for your interest.
No updates at the mo, I've been concentrating on the Black Pearl revival. had a few weekends away and will be doing facias in the next few weeks.
I'll update then :D
 
20141012_172101_zpstyzzplyp.jpg
[/URL]

Get that gaitor swapped Pete, it's had it's day :lol
 
Will it go faster then ? :nenau
Sir , you confuse me for someone that gives a fig :D

You've got to give the aesthetics some thought sometimes :augie

That's why mines all sexy inside now and black everywhere :naughty
 
Hang on I have the Black Pearl , it's blacker than black thing at night :sly
 
You've got to give the aesthetics some thought sometimes :augie

That's why mines all sexy inside now and black everywhere :naughty

We're function over aesthetics down this way anyway :cool:
 

Latest posts

Back
Top