TYRES

[melissachels]

also inner arch at back of front wing will need cutting or hammering back. With muds anyway

yep will have hammer n grinder @ hand :sly that is when i get them still need 2 save a bit 1st!

 

[melissachels]

bought them just need them 2 be delivered then i can get them on once i find a garage with a tyre machine big enough to put them on my wheels :s

http://www.4x4tyres.com/31-1050-15-i...ead--tyre-109q

 

[MudLifeCrisis]

Had 5 of these fitted yesterday in 31 10.5 15's

http://tyresdirectuk.co.uk/shop/product-info.php?prodname=&id=16465

 

[puddle hoppers inc.]

has anyone tried maxxis event ml698 all terrains or heard any reports on them? £84 a corner, bfg tread pattern but not remoulds. thinking of getting some, cheers, mike.

 

[spinna]

I have not tried them but ive just bought the 751's which are 60/40 all terrains and they seem fine but I think the tyre fitters struggled to balance them properly as there is a vibration at motorway speed, so I need to look at rebalancing them.

 

[puddle hoppers inc.]

thanks, think i will go with the 698's come pay day, gotta get my tracking done at same time as it appears way out!

 

[puddle hoppers inc.]

heres some pics of new event ml698's on my terry! i did hope to hold out abit but my old tyres were on the limit! 235 70 16 all terrain, cheaper than remoulds!

 

[puddle hoppers inc.]

£80 a corner, tracking was quite out so sorted that, well pleased!

 

[puddle hoppers inc.]

got to cut off part of my mud flap as they touch on full lock but hey ho!!

 

[stinka]

got to cut off part of my mud flap as they touch on full lock but hey ho!!

Shouldn't do with those little tyres on mate

Your torsions bars need cranking tho as its looks like they have sagged considerably, front should be 20mm lower than back to top of wheel arch moulding

 

[puddle hoppers inc.]

no, loads of space without the -25 et tar. i may get some 32mm spacers for the front, only touching by a mm literally. would get 75's on without the girth!!
cheers, mike.

 

[puddle hoppers inc.]

Shouldn't do with those little tyres on mate

Your torsions bars need cranking tho as its looks like they have sagged considerably, front should be 20mm lower than back to top of wheel arch moulding

i see what you are saying, but the back wheel is in a drop there, a man hole,just before if you will pardon the punn i will measure on level ground, cheers.
(its not about the size you know.....?)