turbo upgrades

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

exosteve

Well-known member
Joined
Dec 17, 2012
Messages
2,740
ive been searching the internet to find an upgrade kit for a 2.7tdi turbo.

I want to get as much power as I can muster from my motor.
as I understand it I need to upgrade the bearings and turbine bits however my search came up with zilch.

anybody know where I can get the required parts :bow

or can I fit a turbo of something else?
 
bigbunny`s your man , he knows about turbo`s
give him a pm
 
Search for Garret T25 upgrades or you could probably fit the T28 but that'll spool up a bit later I think.
I'll try and find the guys I had do my cartridge rebuild. They were brilliant and would do what ever :D
 
You can have your original turbo re built and fit a bigger compressor wheel, it requires the comp cover to be re profiled to allow the bigger wheel to fit. No gain whatsoever unless you up the fuel too!! Your looking at about £450 for the rework and rebuild That's removing and refitting yourself. :thumb2
 
Look at tunit box or the like not work needed just a little computer time
 
Ironically....The best way to up grade a TD27ETI is to ...downgrade it.

By all means get a bigger, better turbo charger. But the gains with the electronically controlled pump are limited even with a chip or piggyback ecu.

The TD blocks can handle alot...and i mean alot of boost. there are guys here running 24 to 30 odd PSI for competition, mine runs 18psi daily and can light up the rear tyres on tarseal.

The key to unlocking the horsepower?, the earlier TD27T or BD30T mechanical pump with a 12ml plunger. then get it on a dyno with a pyro gauge and go for gold.
 
Or buy a fast car :jesterbg

or get your hands on a written off nissan skyline, they share the same transmission, swap the transfer case and bolt the turbo six into the terrano
 

Latest posts

Back
Top