lacroupade
Well-known member
- Joined
- Jan 14, 2009
- Messages
- 9,208
Well. Last time I fitted an aftermarket stereo in the 99-plate T2 it was a breeze....removed centre of dash quite easily, whipped out old radio, fitted ISO adapter cable and bingo, job done.
On my recently-acquired 02-plate things are very different. Firstly someone on here very kindly sent me a link to a site that shows you how to get the radio out. Except it didn't.
Looked fine at first glance - pop out the fascia, remove two screws and hey presto. Borrox; I spent ten minutes carefully extracting the fascia trying not to trash the dash trim, then had to unclip the gearstick surround and remove six more screws up and down the centre of the dash before it finally fell away.
"Home and dry" I thought - until I looked at the cables. The "All Nissan Models" ISO adapter I had just flashed out £12 for was useless.
I've attached a photo of the two plugs and would be interested to know if anyone else has swapped out the OEM unit on this vintage of truck; if so, where did you get your cable??
I've photographed the dissembly and will finish the job when I get the bits so I can post a workshop download, but am awaiting feedback from a couple of suppliers about the right cable....I don't really want to rewire the bl**dy thing...
First pic is of the two connectors that I need to get females for to plug into the ISO adapter (or straight into the ISO socket on the Sony head)...
On my recently-acquired 02-plate things are very different. Firstly someone on here very kindly sent me a link to a site that shows you how to get the radio out. Except it didn't.
Looked fine at first glance - pop out the fascia, remove two screws and hey presto. Borrox; I spent ten minutes carefully extracting the fascia trying not to trash the dash trim, then had to unclip the gearstick surround and remove six more screws up and down the centre of the dash before it finally fell away.
"Home and dry" I thought - until I looked at the cables. The "All Nissan Models" ISO adapter I had just flashed out £12 for was useless.
I've attached a photo of the two plugs and would be interested to know if anyone else has swapped out the OEM unit on this vintage of truck; if so, where did you get your cable??
I've photographed the dissembly and will finish the job when I get the bits so I can post a workshop download, but am awaiting feedback from a couple of suppliers about the right cable....I don't really want to rewire the bl**dy thing...
First pic is of the two connectors that I need to get females for to plug into the ISO adapter (or straight into the ISO socket on the Sony head)...