Mav96
Well-known member
- Joined
- Mar 9, 2014
- Messages
- 437
Both the black and white connectors are the same, they are both 16 pin J1692 specification. May be a trick of the light?
I'll take your word for it, :thumbs
Both the black and white connectors are the same, they are both 16 pin J1692 specification. May be a trick of the light?
think Ray means the connections are the same even if the plastic is a little different, Rick
yes thats what I am trying to get at, there are 3 different shaped sockets so requiring 3 different diagnostic leads yes/no maybe ?
I had similar problem in the outback on Gibb River Road. Incredibly the only service station within 600km had the correct fuel filter. Fitted it in the dark at camp, next morning it ran better than ever before. Start cheap, check the garage that fixed the fuel pump also replaced the fuel filter, it'll look shiny new if it was replaced obviously. Anyway good luck
Also, sometimes when is ideling will die on me, but starting again without any problems and without triggering the engine light.
No DTC for that shows up
Does a fuel filter make the engine light go on ??? With the error "Bad comunication with ECU" ??
I think that the problem is solved.
Found 2 broken wires in the MAF harness, fixed it and everything was the same.
But now, when I changed the MAF for another , made a huge difference.
So, broken wires and defect MAF was the problem !!
Enter your email address to join: