Ok.
Stripped out the dash and had a paly.
Sorry no picture of my before. forgot :nenau but basically you could not read anything but you could see some of the lcd was working.
I took the hole back away from the enclosure and this happened.
had a look over the solder joint's on the rear and it all looked ok so popped in back onto the enclosure all working.
The END ........ lol not really. :naughty
After carrying on with some other work I notice my milage had dropped from the 127772 down to 1772. took a look at the rear and noticed the solder joints on the lcd where indeed broken.
Took it Home to solder up.
Got my camera out and took a look using a macro lens.
And proceeded to solder up the pins. considering earlier when i first looked and it i could not see these brakes i decided to do every single post.
This shows the red you could see was broken and the green you could not see but when i checked them with a meter they had no connection.
even after soldering them all one never took so you got to double check.
Finally all done plugged it in today with no problems.
.