- Joined
- Jun 14, 2012
- Messages
- 5,217
- Reaction score
- 1
I decided to install my engine pre-heater today and at the same time lift the intercooler so the bonnet sits down on it.
I need to wait for a couple of bits to arrive to finish the intercooler, as I did not realise before I started that the threads are all M10 1.25 metric fine thread so the studding I had to do the job was wrong.
So, while everything was out the way, I decided to fit the pre-heater in a great spot on the fire wall.
Here is the pre-heater.
While doing it, I also fitted a bleed cap, so I can make sure there is no air trapped in the heater.
Overall install.
The Pre-heater has a small pump in it, so it cycles the water round the heater matrix, and then the engine block, warming it up to about 90degrees.
Looking forward to the winter now....
I need to wait for a couple of bits to arrive to finish the intercooler, as I did not realise before I started that the threads are all M10 1.25 metric fine thread so the studding I had to do the job was wrong.
So, while everything was out the way, I decided to fit the pre-heater in a great spot on the fire wall.
Here is the pre-heater.

While doing it, I also fitted a bleed cap, so I can make sure there is no air trapped in the heater.


Overall install.

The Pre-heater has a small pump in it, so it cycles the water round the heater matrix, and then the engine block, warming it up to about 90degrees.
Looking forward to the winter now....