Well yesterday I bit the bullet and fitted my old Amstrad 901 CB radio into a modified cubby hole similar to Fez's installation, Alan Sugar would have been impressed.:augie
The mic socket is on the left side so I had to position the radio so that the mic socket could be accessed through the side but just in front of the vent.
I also bolted it in via the sides of the cubby hole.
It was necessary to remove part of the rear and the top of the cubby hole.
I recently dug my Amstrad 900 out of the cupboard. Have been thinking of the best way to fit in the Mav and keep eyeing up the cubby hole. Any chance of a pic so I can see how it looks fitted?
Got the same issue with the aerial too. Have been considering a spare wheel mount affair or roof rails for height?
Nick
Yes I believe you can upload as an attachment using the paperclip icon on the toolbar at the top of the message box. When the upload box appears it has a key to advise maximum file sizes.
Don't forget you need to SWR the antenna......well we did in the olden days, still have the old swr meter from my trucking days 10-10
Never mind the olden day's you still do:thumbs possibly more important now with the advent of more channels.
For what it's worth I've found the best spot for aerials has been to buy a clamp for the roof rails. Remember to remove it when you drive under anything low I forget sometimes but soon know about it:doh
Jim
Enter your email address to join: