electric windows

[zippy656]

msatchwell has all his wires fall out the multy plug inside the door

Any one know where they should go. Or have a pic

 

[solarman216]

Which door? Rick

 

[solarman216]

This is drivers door with the relay, any good, it is not clear enough to see but if you tell me which plug I can do a close up before I put the card back on, just replaced a dodgy window switch, Rick

 

[msatchwell]

Thanks

Hi Rick,

It's the socket that plugs into the main control for all the switches for the electric windows if the can take a close up picture of that, that would be brilliant. Thanks.

 

[96terrano]

Hi mate, the relay in the door is only for the drivers door, its for the auto 1 touch system:thumb2

 

[msatchwell]

Hi Rick,

It's the socket that plugs into the main control for all the switches for the electric windows if the can take a close up picture of that, that would be brilliant. Thanks.

 

[msatchwell]

 

[msatchwell]

 

[96terrano]

Ahh, that's the newer terrano....Bugger:doh

 

[msatchwell]

Hi Rick,
Not to worry I'm sure somebody can help.
Thanks anyway.

 

[rayf3262]

This is what's shown on page EL-134 of the manual:
Connector on door sw assy. (D69)

1 L/W
2
3 B
4
5 R/W
6 R
7
8 L
9 G/R
10 G/W
11 G
12
13
14
15 Y
16 Y/B

L = BLUE
B = BLACK
Y = YELLOW
G = GREEN
R = RED
W = WHITE

 

[rayf3262]

Here's a pic too...

 

[msatchwell]

Brilliant, thanks a lot. All done, apart from I know need a new module as one of the relays burnt out and front drivers window won't work.

 

[solarman216]

might be possible to change the relay, if you can use a soldering iron, open the box and post a pic of the burnt relay and I will see if I can match it, Rick