Bushing

[shug243]

Hi. Can anyone tell me type of bushing that sits between the lower wishbone and chassis. Actually sits on on a bracket on the chassis. And do I need a press to fit a new one.

 

[shug243]

Any takers

 

[R1cho]

trying to work out which one you mean, have you got a picture? only one i can think of is these http://www.milneroffroad.com/nissan...spension-wishbone-rod-bush-kit-1-side-lower-1

 

[shug243]

I will take pictures thanks

 

[makeitfit]

Sounds like comp rod bushes. No press needed for them but be prepared for possible hole elongation or corrosion where the rod goes through the bracket/chassis.
Also worth spraying plenty of WD40 or similar on your nuts for easy release :lol
Good luck.

 

[shug243]

Yes that's the one. Soon as I order part I will have a look. If needing attention I will get that putty stuff and remould it so it all looks good for mot. I've used that stuff before and it's good. Ab weld

 

[paulp]

bush

hi it is worth ordering the wahers as well.
My chassis point was elongated but the old washers were good so i used the old washers to weld to the chassis

loads of WD 40 and a long swing bar

paulp

 

[shug243]

Why the swing bar. Is that to hit the bolt out?

 

[Terrano Steve]

I read that as long socket bar for leverage undoing said nuts that you have just soaked in wd40

 

[shug243]

Ahh ok. Milner does them. £10. £5pp. £4vat. Trying to get them cheaper.