Air con rad

[DEE]

Anyone know if a mk1 aircon rad will fit a o5, R20 2.7 Without having them both to hand i can not see Have seen pic's of both and look! no diff, Why i ask is a stone :doh went through mine a bit back. And i found a brand new mk1 at the right money. If it will not fit anyone got a good one to sell me :thumbs

Thanks

 

[lacroupade]

Anyone know if a mk1 aircon rad will fit a o5, R20 2.7 Without having them both to hand i can not see Have seen pic's of both and look! no diff, Why i ask is a stone :doh went through mine a bit back. And i found a brand new mk1 at the right money. If it will not fit anyone got a good one to sell me :thumbs

Thanks

You mean the original square headlight jobbie? Didn't realise they did it with aircon!

But, I'd say, given the relatively low sales volume of the Terrano and how that drove what were largely cosmetic facelifts, its a strong possibility.....but I doubt anyone has done it yet...?

 

[briggie]

You mean the original square headlight jobbie? Didn't realise they did it with aircon!

But, I'd say, given the relatively low sales volume of the Terrano and how that drove what were largely cosmetic facelifts, its a strong possibility.....but I doubt anyone has done it yet...?

mine has square headlights , and has aircon ...... ok its a imported mistral

 

[DEE]

o

Well i no the mk1 did not have air con i had one many years ago :doh Not my cup of tea. Right getting back to the question All that is stated in the addvert is a brand new ford mavrick 2.4 /2.7 genuine ford ? air con rad if this is from the face lift ie chrome front i can not see why it will not Am i wrong

 

[lacroupade]

Well i no the mk1 did not have air con i had one many years ago :doh Not my cup of tea. Right getting back to the question All that is stated in the addvert is a brand new ford mavrick 2.4 /2.7 genuine ford ? air con rad if this is from the face lift ie chrome front i can not see why it will not Am i wrong

Dee I'd say even on the MkI the basics will be the same....after all the engine was unchanged from Day One and like I said, Nissan was tight as feck when it came to facelifting, with hardly any body panels modded - I think the wings were the only metal panels that changed along the way when they facelifted to MkIII......the rest was front bumper mouldings and some fitting for the revised plastic grille.....

I'd say just have a go.

I'm just a bit confused about what this rads off though....you said "I know the MkI didn't have aircon' but you say its a MkI rad....also that its from the 2.4/2.7.....is that latter bit a clue? I don't know the answer but I'm not sure I've seen a MkI petrol version (2.4)...can anyone advise? If not, then it will be a MkII rad I guess...??? But I was wrong once before....:augie

 

[DEE]

derrrrrrrrrrrrr

Sorry all, Lets start again. :lol mk1 terrano aircon rad from 93 to 96 thats what it says Get there in the end Testing, one, two, Got to fit. Think i will go for it

 

[solarman216]

the MK1 that I broke a while ago had AC but the rad was badly corroded so it went to the scrappi, still have the inside rad though, also my Mk 1 has AC but leaks so cut the belt off, only do round town in it so AC not worth it, Rick

 

[solarman216]

one on ebay with dimensions, new item, number 320452926376, Rick

 

[geoffdown]

Sorry all, Lets start again. :lol mk1 terrano aircon rad from 93 to 96 thats what it says Get there in the end Testing, one, two, Got to fit. Think i will go for it

i to have been looking for 1 of theses and the site i went to lists two diff condensors for the mk1 and mk2 the lay out looks diff not the size i.e the pipes and how they screw on might be wrong look here http://www.autoairconparts.co.uk/Ni...ssors-pumps-aircon-radiators-and-more/:thumb2

 

[mowerman]

I believe they are 2 different animals.... mk 1 has a pipe on 1 side and a direct fitting on the other (pipe bolts straight onto the condenser unit) and the mk2 oneards has 2 pipes that fit via compression fittings (and they exit into different places in relation to the vehicle for picking up the rest of the pipe work)....

try this linky and the pictures are on it (mk1 & 2)

http://www.autoairconparts.co.uk/Ni...-compressors-pumps-aircon-radiators-and-more/

 

[DEE]

I believe they are 2 different animals.... mk 1 has a pipe on 1 side and a direct fitting on the other (pipe bolts straight onto the condenser unit) and the mk2 oneards has 2 pipes that fit via compression fittings (and they exit into different places in relation to the vehicle for picking up the rest of the pipe work)....

try this linky and the pictures are on it (mk1 & 2)

http://www.autoairconparts.co.uk/Ni...-compressors-pumps-aircon-radiators-and-more/

Bang on there you are :thumbs

 

[DEE]

one on ebay with dimensions, new item, number 320452926376, Rick

That is just the thing. Gave them a bell this morn got no stock till next week he said I got home Belled them again Yes we got some in just buy online Bloody week soon went by Will bell them again in the morn Find out what he is sniffing