Adz version of "extreme" raised air

[Adz]

Here you go folks

Doing it at long last :augie :lol

Colin was the 1st,trial & error but works 100% :clap :bow
Pete was the 2nd,learned from Colin & slightly neater inside :clap
Adz is 3rd,done the Essex way :naughty :sly :lol


The instructions & tools needed...

1.Phillips screw driver
2.Flat head screw driver
3.10mm socket
4.Hole drill (neater :augie or grinder :doh)
5.Stanley knife
6.Scissors
7.Tape measure


1.Open up bonnet & remove nut holding grommet

2.Remove plastic trims :-
A.On the sill
B.The engine release

3.Remove glove box

4.Remove the air box & unplug it

5.Pull back carpet to reveal sound proofing

6.Cut a 3" square in the sound proofing where the grommet was.
This can be located as there are a couple of cuts in the soundproofing.

7.Cut the hole in the bulkhead to suit the size pipe you have.

& just for Pete :lol :augie :naughty

Now fully stripped out :sly


More pics to be added when i get time :nenau It will be completely finished on 18/10/09

 

[extreme-4x4]

trial and error................ now that bloody hurts

i'll have you know im happy with mine

 

[Adz]

trial and error................ now that bloody hurts

i'll have you know im happy with mine

Didn't mean it nasterly :doh meant you were the 1st & had to do all the hard work & testing :bow :clap

 

[zippy656]

it works well, Mrs Zippy didnt like the idea though... and now ive got the K&N cant have any snorkle..

 

[lacroupade]

trial and error................ now that bloody hurts

i'll have you know im happy with mine

Once you put some foam around the bloody thing to save my poor old nut!

 

[zippy656]

if its close to your nuts its in the wrong place!

 

[lacroupade]

if its close to your nuts its in the wrong place!

yeah but you'll notice I said 'nut' singular........got to look after it....! LOL

 

[makeitfit]

it works well, Mrs Zippy didnt like the idea though... and now ive got the K&N cant have any snorkle..

Ofcourse you can have K & N with a snorkle or Extreme air:augie
It's on mine:naughty

 

[lacroupade]

Ofcourse you can have K & N with a snorkle or Extreme air:augie
It's on mine:naughty

in the original airbox as opposed to an induction kit?

and BTW, any issues with Strata in the dark Pete?

 

[makeitfit]

in the original airbox as opposed to an induction kit?

and BTW, any issues with Strata in the dark Pete?

Oh, yep in air box
Strata was fine in the dark, great fun and woooo wierd, brill dusk atmosphere
We did the gap at dusk and the steps in the dark,that was a challenge:sly
Got to use all the lights though :thumb2

 

[lacroupade]

Oh, yep in air box
Strata was fine in the dark, great fun and woooo wierd, brill dusk atmosphere
We did the gap at dusk and the steps in the dark,that was a challenge:sly
Got to use all the lights though :thumb2

think i'm gearing up for a midnight thrash.

then I might go and do Strata afterwards....:lol

 

[zippy656]

in the original airbox as opposed to an induction kit?

and BTW, any issues with Strata in the dark Pete?

iz do got the induction one..

 

[Adz]

Remaining pics to be added this coming Sunday (01/11/09)
As i'll be finishing it this Saturday

 

[Tommeke]

looking forward to it...

 

[Adz]

Well its 90% finished :doh

Just need to acquire a nice bit of flexi tube to go from the bulk head to the roof

The sock is tempary :augie Made a nice filter to go on :naughty

 

[P40MRT]

It's gonna sound like a really dumb question, but is there enough 'flex' in those short lengths of silicone hose to allow for engine and body movement?

Dale

 

[Adz]

Yup :augie

& theres an inch at the turbo :thumbs

 

[tezzer]

you could have painted the bulkhead blue instead of black adz, what size flexy do you need? :nenau:naughty

 

[Adz]

you could have painted the bulkhead blue instead of black adz, what size flexy do you need? :nenau:naughty

Only came in black or white its some special water proof / heat resistant / hole sealing paint thats used on boats :nenau but the me uncles department not mine :lol i just do the grinding :naughty
Will paint over it in blue once i've finished anti rust painting (in grey)

70mm & about 5 - 6 foot to be safe as i cant make up me mind which way to route it :doh

 

[extreme-4x4]

but where is the inlet going ?