Search results

I believe there is two oil pressure switch's , low pressure, high pressure switch, one at bottom of engine and one higher up, 99 times out of 100 it's the top switch that's faulty, The one iv'e changed on mine. Mine was that the light came on but everything was ok with engine just faulty switch...

Left hand side, drivers side, towards back engine about about 6" down from top of engine, very awkward to see but can feel with hand. Need 27mm deep socket to remove once you remove wire connector. Found easiest way was to unbolt the radiator expansion bottle at front of engine and lift out of...

He said have I got the mondeo engine? It's locally to me so I can go and have a look at the diff and also the truck to see what it is. Thanks plank have sent you a post.

Do they do a 3.0 petrol v6? Or is 2.4 the only petrol model they do? Can't seemed to find any info on a 3.0 petrol version.

Can anybody tel me please what the engine/chassis number starts with on the 3.0 v6 petrol terrano. As been offered a diff from one but want to check on Nissan 4u part number site to see if will fit my 3.0d .mine starts zd30 and vskjwnr20u. If anybody has a petrol 3.0 would appreciate some help...

No it's on road ! And not in 4wd. It will do it at any slight camber change or turn. Still does it with front prop removed eliminating transfer box.

Hi mate, have replaced uj's twice now and fitted new cv joints, if I disconnect the front prop it still does it, but you can hold the input end of diff and the cv joint ends and turn nearly 1" before play taken out. But doesn't clocking when pulling away nearly always when slight turn or uneven...

My front diff has quite a bit of play in it , making clonking noises now and again, is there a thicker grade of oil or additive I can add to help, I know long term another diff required but 3.0l very hard to find. Had someone look at it and confirm play a little excessive but said never known...

Thanks Rick, mine measures 685mm wide, 405mm top to bottom, 19mm thick approx. The pipe work on the 2.7 seems to look the same size and comes out of the condenser in the same places as the 3.0, just the top to bottom measurement seem different. Have a measure up please and let me know thanks.

Can any body tell me why the condenser needs to be bigger on the 3.0 than the 2.7? Had a measure up of my friends 2.7 and his is exactly the same in width , depth, but 35mm shorter from top to bottom, pipes in same place and size. I reckon I could make a 2.7 one fit but worried why the...

Can any body tell me please where I can get a condenser for my aircon as it has developed a hole and a new one is required. Every where only seem to list for a 2.7, nothing for a 3.0. If not may have to get it repaired. Don't want to buy second hand as may find same problem.

Fitted a pair of these this afternoon and they sound great,far better than my one horn I had. Only had one wire on my old horn also so just connected that and ran extra wire to other and earthed each to body work, worked a treat! Thanks great value at £7.00

Thanks mate,will fit next week when I get a few days off.

Just bought same ones only thing is I have only one horn on mine.looks like one wire is live and one to earth. What I was going to do was remove the two wires from my orginal horn ,fit new horn and put double spad connector on one new horn,connect original wires back on and run two more new...

Thanks, job for next week :thumb2

Just ordered a set of these, then had a look behind grill and can only see one horn on my 2005 commercial . Do you think I can just split and extend wiring to add second horn or just fit the one? Not sure if it's standard to just have one horn on newer models.

Just sorted mine, My Commercial was leaking also. I removed black trim and put bead of roof cutter sealant underneath and refitted, also pulled off the black side edging trim which pushes onto the welded seems which run down the sides and meet the trim at the bottom, placed bead sealant on edge...

I fitted NGK glow pugs at £86.00 , when I removed my old original ones which had done 138,000 they were NGK! So I think they are top quality and you get what you pay for! Fitted metal ones also.

Does any body know how much play there should be in a front diff? Mine I believe is on its way out,I've replaced both cv joints and uj on props but have this really bad clonking from front whilst driving, have compared front diff to rear and front has far more play and if you turn the drive end...

Was wondering wether i have the same problem, very bad clonking but not all time and dosen't seem to matter if turning or not. Have disconnected front prop and can feel some movement in cv joints but also play in diff.Can go out in truck and seem ok the pull up outside house and clonk! Another...