Search results

. Here's a thread that I done when I fitted my winch stinka I bolted the winch mount directly to the chassis were the metal bumper bar goes and managed to fit the bumper iron in there too so if I ever need to remove it I can. I've got 13,000 lbs winch with only one alternator and 95ah...

. To the best of my knowledge my mates maverick doesn't have any Intercooler ?

. This is the air filter we are both running http://www.ebay.co.uk/itm/CARBON-FIBRE-COLD-AIR-INDUCTION-KIT-FEED-FILTER-SYSTEM-3-76MM-BLACK-2105-JL1224-/251147084297?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a79886209#ht_601wt_689 Both have been fitted within the last month and both were...

. Never used veg oil only petrol station fuel It seems like the truck feels sluggish but with no symptoms if that makes sense .

. Egr valve disabled has been for last 18 months inlet butterfly removed, the fuel lines I replaced were 8and 6 mm frm the tank to approx by the drivers door and the fuel filter seems ok manual bleed pump goes hard ? I'm stumped ?

. Il check that tomorrow I think also when revving on idle his seems so much freer when revving mine seems to rev slower ? We were both going about 35-40 mph and when he put his foot down I just couldn't live with and that's dropping down a gear as well I've driven his truck and feels so...

. Forgot to mention his maverick is a n reg square headlights and my terrano is p reg round headlights

. Alright Pete I'm running 33x12.5 x15 he's running 31x10.5x15 my old set up We both have the same carbon fibre cold air intakes with exactly the same size running on the inner wing to homemade pipe both exactly the same But his is so loud and mine is so much quieter Both run on petrol...

Hi guys just a quickie I have a 2.7 tdi and my mate has a 2.7 td and his truck by rights should have slightly less power than than mine but his feels so much quicker than mine. I know it's not all about speed with these trucks but I'm thinking I may have a problem if this is the case. His...

. Hi rick thanks again for today mate top fella :thumbs:thumbs My mate was well happy and loves his truck all over again :thumbs The rear door rad mod you've done is really tempting me. I've checked out boxgrove pit for next month and me and my mate will be there So hopefully we will see...

Hi guys I'm going to service my hubs but if I remember correctly my hub circlips may need replacing I phoned my local dealer nice and helpful NOT !!! The only one they had in stock was a thickness of 1.7mm :confused: He then went on to say what thickness are my circlips lol So I said how...

. They were only off a month or so ago and they looked clean but why would they stick on on there own when going over a bump in the road ??

Hi guys over the last few days I've been getting a strange sound from my front hubs when sometimes going over undulations in the road the front hubs sound like they are about to lock but I'm not moving the 4wd leaver and today I went over a speed bump and the sound persisted to the point of me...

. Tell me more briggie

. Hi guys sorry to sound daft but what have I got to remove ?? I thought the thermostat housing was part of the head ?? Are you saying I can remove the whole thing from the head ?? Anyone wanna give me a hand or do it for us as its my mates car ?? He don't mind paying he just wants it to...

. Guys today me and my mate went screw fix and bought some 8mm threaded rod and screwed that into the hole and it seemed to pick up the thread so we chucked a couple of nuts on and tightened it up but we found if we tried to tighten it to much It was just pulling back out. We then put it back...

. Hi guys thanks for the input cleaning the hole maybe an issue as the hole is about 4 or 5 in depth but I wonder if I managed to get another bolt from a maverick that's breaking at my local breakers and whack some washers in there to space it a bit would a silicone sealant work with a new...

. The bolt comes out but the problem is when I tried to put it back it doesn't seem to tighten enough like the bottom of the thread has already snapped and the bolts threads left wont tighten tight enough I was thinking new gasket and some sealant ??? What do you guys think ??

Hi guys my mates mav now has another problem the thermostat housing leaks by where the long bolt goes so we decided to remove the housing and replace gasket only to discover the long bolt is in a bad way we replaced the gasket and went to tighten it but it seems to tighten so far but then just...

. Thanks guys I think I'll Bleed the system up first then see if there any leaks I'll report back in a few days