Search results

Hi. i need a new track rod end for my T2 and it the one that goes onto the centre relay rod.... All i need to know is, do i need left hand thread or right hand thread. Also its on the right hand side drivers side. cheers:confused:

oh yeah forgot that bit :lol

dont forget to remove the calliper first

remove the wheel, undo the bolts for the auto hubs and remove hub. then remove the circlip on the end of the driveshaft and slide off the washers etc and then the inner wheel bearing should just about fall out. then remove the 6 bolts around the hub and the disc and frame can be removed from the...

wow. thanks for the info. better get on with it, not much time left

Just wanting to know, how do i adjust the handbrake to take up the slack on the cable. also any other things to check before the dreaded MOT on Wednesday. ive welded the sills, polybushed everything thats rubber at the front, changed the roll bar links and fitted a couple of rubbers to the...

Take a look at this.... http://www.amazon.co.uk/REAR-Brembo-Brake-NISSAN-TERRANO/dp/B004DWRFFO

Definatly not front pads as there too small. ive had a look on a few motor factor sites and they supply rear brake discs and pads. bizare:nenau

how come apec make brake pads for the terrano if they dont have discs:nenau:confused: have a look at the link on my earlier post:confused:

some have discs and pads at the rear. its pad 1210 not pad 1012. www.apecbraking.co.uk/catalogue/frictionview/item/782315

brand new in a box i have some rear brake pads for a terrano. The brand is Apec Pad1012. first decent offer can have them.:thumb2

do the caliper sliders need a bit of grease or should they be dry

while im here i could do with some info about the brakes or steeering. when i brake hard or at speed the car pulls sharply to the right :eek: its all polybushed at the front and ive just changed the drop links on the roll bars. could it be seized calliper or knackered shock absorber or am i way...

haha:naughty

No. i didnt check the level. im planning on draining and refilling it. what oil is recommended for the gearbox

Just done a trip to Devon in my Terrano 250ish miles and noticed at the end of the trip that the gearstick was quite hot to the touch and also noticed a gear oil smell... is this normal? ive had the T2 up on ramps and theres no sign of fluid loss on the box and it still feels quite smooth. Any...

Ive had the exact same rot. to fix it i just platetd over the sills and fibreglassed the arches. total cost was no more than 40 squid. the outer sills could be fibre glassed but i decided to weld mine because they take a beating. the inner sills only need welding if there within 300mm of a body...

is it the origional Nissan multichanger your after? Theres one under my drivers seat :thumb2

cheers. i will take a look:thumb2

is there anyone up for a day out. i havent been off roading properly yet and i feel ready to loose my virginity. i hear carsington is good for novice action. if anyone wants to arrange it id be grateful as i have no knowledge of routes. :thumb2