Search results

seen their adds a few times so out of curiacity i looked to see what they show for a terry.well malaware threw a woberly and said its blocked because its a phishing site. so closed browser and opened up opara with vpn,well got in but you get a selection to choose from so i went for diesel...

welcome and have fun,what the guys on here dont know about the terry ,its probably not worth knowing but we all can learn something just reading the posts.

no water cooled egr on mk2 water cooled egr on mk3 solved the problem.

well after a new battery,one on it kept losing charge,second hand rear in bumper lens,thanks to banshee,new wiper blades and the work solerman did a long while ago it sailed through MOT with one advisory,greased up brake pipe,for second year running.he said he has not seen a terry so solid and...

n reg what mark that is i do not know.he had a intermittent ip leak but he ran through brake fluid and that seamed to have swollen the seal and stop the leak for a long while then it would do it again so another dose.his main problem was towing up hills as the temp would rise,he did everything...

my brother had a pj,nothing but problems 3 full head replacements oversize rad,3core, new viscus fan then twin 17 in electric that kept burning out the controllers,but were replaced free and upgraded finally it was ok.no probs for a couple of years then he bloody sold it to a polish chap who...

find the ends of the radiator,the bars come through the front panel at bottom of rad,feel for the bars attached to chassis you should feel the bolt studs come through,at least then you know where the bolt heads will be under wings.

if you cant find the 4 bolts then another way is to take the plastic bumper of off the steel cross member.if i remember its take front grills off that then exposes and remove the many push fit little plugs that go through bumper into the steel top and some bottom i think, remove number plate to...

as said,one behind bumper side,a pig to get too so take gumper off.4x 17mm bolts,take bottom bolt out but only undo top bolt as bumper fitting has a slide to hold and line up bumper,if you undo top bolt its a pig to get back in as its inside the box section,the top bolts are longer as well.

i looked into the chinese batts and concluded it was not worth getting them inported as some already here were not much dearer.you can take them to almost o volts as the built in brains cut off power out completley,the good thing about them is they output full volts not a reducing volts and take...

welcome to the best terry brains on web.

well done,mine is due befor 11th.

welcome to you.

welcome and have fun with it.here in uk rust is the biggest problem.

rick,remember the crap with my 3l abs master cylinder,it had me captive at yours for a couple of weeks.

i look in often and see whats happening

another year paid for.

i put a 150w 12v water heater in my old van as it did not have hot water,it was put into a 5lte water holder connected to a switch that was connected to a temp thermostat and when on drew 18amps and took about 30 mins to get to 40c.i set it all up out on field running it from my car and tested...

i changed my 2.7ip and the way its timed i would say no you cant put it in 180 out.the timing marks must be spot on.when i changed mine i even left the pump gear in situe and lined ip the woodruff key.it took a bit of bleeding but when it fired up it did not miss a beat.

it could be the little switch at the back of the ignition key,mine killed the starter as well.