96terrano
Well-known member
- Joined
- Jun 27, 2010
- Messages
- 8,022
again, my fecking wipers got jammed and wouldn't turn off, so instead of emptying the relay of water and blasting it with mums hair dryer, i disided to tackle this inconvenience ONCE AND FOR ALL!!!:hmh
should work with variable and non-variable
mine is variable
1st step, take the relay apart and drain out the water out....quite a bit came out mine:doh:augie
2, blast its internals with mum or wife's hairdryer :augie
3, seal the terminals inside with hot glue try not to cover unnecessary components with glue especially the relay as this needs to be free to move
4, put it back together and seal all the gaps, make sure the connector will still fit
your done, give it a test
should work with variable and non-variable
mine is variable
1st step, take the relay apart and drain out the water out....quite a bit came out mine:doh:augie
2, blast its internals with mum or wife's hairdryer :augie
3, seal the terminals inside with hot glue try not to cover unnecessary components with glue especially the relay as this needs to be free to move
4, put it back together and seal all the gaps, make sure the connector will still fit
your done, give it a test