where to get arb rose links

[Madmark]

My arb links on front are dead so want rose joint them. So any links etc where to get them etc

 

[RJL Services]

not sure but someone on here was making them i think it was bigbunny but stand to be corrected
:thumb2

 

[Banshee]

My arb links on front are dead so want rose joint them. So any links etc where to get them etc

Elty sent me mine IIRC, McGill Motorsports may have some as that's where I got my misalignment washers from after I misplaced the original set :doh

You been looking at my Instagram again :naughty

 

[Madmark]

Had loud bang and lots of grinding lol also cv boot need doing

 

[russell.huffer]

I bought mine off ebay, just be aware o what threads you get as all jap cars use metric fine 1.25 pitch but you can get m12 in 1 and 1.5 pitch.

Kind regards

Russell.

 

[Banshee]

I bought mine off ebay, just be aware o what threads you get as all jap cars use metric fine 1.25 pitch but you can get m12 in 1 and 1.5 pitch.

Kind regards

Russell.

Post of the day!!!!!!! Was just about to say this :clap
Had the same problem when my brother stole a nut from my tie rod end kit in the shed for his Jimny and I went out to get a new one and still haven't as yet found one :doh

 

[elty001]

as long as the thread pitch of the rose joint matches the bolt it doesn't matter as you are not using any of the original nissan parts.
nissan use the fine pitch metric thread banshee,what bolt are you after as i have got a selection and i might have one.

 

[Madmark]

Woo woo anti roll bar link in after not tie rods

 

[Banshee]

as long as the thread pitch of the rose joint matches the bolt it doesn't matter as you are not using any of the original nissan parts.
nissan use the fine pitch metric thread banshee,what bolt are you after as i have got a selection and i might have one.

It's the nut I'm looking for that go on the tie rod ends, got a brand new set in the garage and my brother has stolen one as the on on his Jimny was damaged

 

[elty001]

It's the nut I'm looking for that go on the tie rod ends, got a brand new set in the garage and my brother has stolen one as the on on his Jimny was damaged

will have a look for you tonight when i get back from work:thumb2

 

[elty001]

Woo woo anti roll bar link in after not tie rods

you have to buy the parts seperate to make the drop links.
McGill racing for the rose joints and misalignment washers,milners for the bushes and a local fasteners supplier for the nuts and bolts.

 

[Madmark]

Ok cheers elty any idea what I need as in sizes and threads etc

 

[Banshee]

you have to buy the parts seperate to make the drop links.
McGill racing for the rose joints and misalignment washers,milners for the bushes and a local fasteners supplier for the nuts and bolts.

Yeah, the longest part about this mod was sourcing all the parts!!!! The misalignment washers took agessss to come as well :doh

Then there was getting the 60mm Shanked Bolts
Everywhere I rang didn't even know what a shanked bolt was, hardware stores were looking at me like I was an alien, then I tried a local Hardware Store in Warwick and he just fetched them out the back, apparently a common bolt for a landy application too :lol

 

[Madmark]

I just need rose joint specifics as can get any type of bolt at local Jonny junks lol

 

[Banshee]

Rose Joints
http://www.ebay.co.uk/itm/M12-Female-RH-Rose-Joint-ULTRA-HIGH-PERF-12mm-ROD-END-/160529417760?

Misalignment Spacers
http://www.mcgillmotorsport.com/m12-rod-end-misalignment-spacers-12mm-pack-of-4-390/

M12 60mm Shanked Bolts
http://www.ebay.co.uk/itm/M12-x-60-...838175?hash=item53eb1d189f:g:uLsAAOxypNtSjR6s

Get this ordered at the same time
Front Anti Roll Bar and Droplink Bushes
http://www.milneroffroad.com/nissan...ension-1/r20-suspension-anti-roll-kit-front-1

Do some measuring though mate and get yourself a selection of repair washers as well, I can't be sure that the shanked bolts were 60mm but 90% sure they were

 

[jims-terrano]

How much difference does this mod make and is it just for lifted trucks.

 

[Madmark]

Thanks bud its the rose joints and shanked bolts that I need I've got the rest

 

[elty001]

How much difference does this mod make and is it just for lifted trucks.

ive not noticed any difference in the handling of the truck Jim,but i have noticed that ive not had to buy any bushes or droplinks since doing this mod 2 years ago.
i'd be on my 4th set of standard droplinks by now
dont see any reason why it can't be done on a standard truck.

 

[Banshee]

How much difference does this mod make and is it just for lifted trucks.

No difference in handling other than I know I can corner hard at speed if needed without the Milner butter ones snapping in half as Marks has, the Rose Joints are well hard :sly

 

[Madmark]

In fairness these lasted a good year of hard punishment so on road truck they'd have been fine but yeahh rose joints now to handel the greif I give it lol