Where can i get a cluch hose???

[pablo0874]

does anyone know where is the best place to get a clutch hose ,the one that goes from the slave to the square junction before going on to the master cylinder,
i replaced the cylinder last week as that was shot now im losing fluid and the only place its coming from is the flexi pipe,
ive looked at the parts catalogue and it dont look the same as that one there is a number on the pipe j10401 1/8 if that makes sense ,
i may also add theres no damper pipe on mine so theres a channce that the pipe is not original i dont honestly know ,any ideas anyone :thumb2

 

[11redrex]

are you sure it's coming from that pipe and not running down from somewhere else ?

 

[solarman216]

I use Autolec in Bexhill order before 12 noon, in next day, last one was about £25 I think, but you should be able to order from your local factors, Rick

 

[pablo0874]

are you sure it's coming from that pipe and not running down from somewhere else ?

no ive checked theres no trace of fluid before the pipe its from the pipe somewhere ,where i dont know but its defo the rubber pipe

 

[pablo0874]

I use Autolec in Bexhill order before 12 noon, in next day, last one was about £25 I think, but you should be able to order from your local factors, Rick

cheers will look at that but i rang local factors they wanted 40 quid local ford dealserd saying same one of maverick but i havent seen a picture of it yet will cost 12 quid , do youknow if its the same of a maverick the clkutch hose?

 

[spiderpig37]

does anyone know where is the best place to get a clutch hose ,the one that goes from the slave to the square junction before going on to the master cylinder,
i replaced the cylinder last week as that was shot now im losing fluid and the only place its coming from is the flexi pipe,
ive looked at the parts catalogue and it dont look the same as that one there is a number on the pipe j10401 1/8 if that makes sense ,
i may also add theres no damper pipe on mine so theres a channce that the pipe is not original i dont honestly know ,any ideas anyone :thumb2

Hi the one someone got for me sounds like yours just had a look on the bag it came in gives the part number as ADN153904 Clutch hose the number you quoted is the size of the pipe i think as it says on mine j1401 the make of the hose is a blue print you type ADN153904 in to google it brings up a search and shows a picture of it from blue print
hope this helps
cheers ANDY

 

[lacroupade]

cheers will look at that but i rang local factors they wanted 40 quid local ford dealserd saying same one of maverick but i havent seen a picture of it yet will cost 12 quid , do youknow if its the same of a maverick the clkutch hose?

mechanically identical if a MkII Terrano, i.e. pre-2000 facelift.

 

[pablo0874]

Hi the one someone got for me sounds like yours just had a look on the bag it came in gives the part number as ADN153904 Clutch hose the number you quoted is the size of the pipe i think as it says on mine j1401 the make of the hose is a blue print you type ADN153904 in to google it brings up a search and shows a picture of it from blue print
hope this helps
cheers ANDY

ive just dine what you said yes mine looks like that but i thought it was just the pipe bit you had to replace not the box as well but that looks as if it comes as a complete unit ,can you buy direct from blueprint or they sell to local factors who then add the cash on

 

[pablo0874]

mechanically identical if a MkII Terrano, i.e. pre-2000 facelift.

cheers for that just checking pity there isnt a parts catalogue for the maverick as well

 

[spiderpig37]

ive just dine what you said yes mine looks like that but i thought it was just the pipe bit you had to replace not the box as well but that looks as if it comes as a complete unit ,can you buy direct from blueprint or they sell to local factors who then add the cash on

dont think you can buy direct? and it comes as a complete unit
cheers

 

[pablo0874]

im glad thats done ,ordered one from local motor factors blueprint one ADN 153904 £34.99 we know blueprint is £23.00 but you cant buy direct,
but 35 quid aint bad got old one of just put new one on bled all pipes sound as anything next mission front pipe and new tyre ,heres a pic of the old one exactly the same as the blueprint but mine doesnt have a damper pipe leading to the rear someone must have done away with it and capped it with a insert nut :clap:clap:clap

 

[mowerman]

Hmmmm... looks like a brake hose for a motor cycle? I wonder if you could get one made up with the correct ends (banjo for the clutch end and a screw in fitting for the clutch cylinder) and connect from master cylinder to slave??? A nice stainless stell braided jobby :clap:clap:clap

 

[spiderpig37]

glad you got sorted still got mine to do waiting for snow to go if it keeps thawing should be ok on sunday need to get somthing to blank the damper connection hole?
cheers Andy:clap

 

[pablo0874]

:lolis yours leaking at the moment because mine started slow leaking and just got worse i would only do 2- 3 miles journey and master reservoir would be empty aand then it would have been another master happy days now just waiting for the next surprise:lol:lol

 

[spiderpig37]

just weeping at the moment i can get away with topping it up depends how much i use it,dont want to leave it too long incase it goes all together

 

[pablo0874]

:loljust one word of advice from what i experienced today if you havent already done this yourself before ,before taking of the old hose and losing some fluid make sure you keep the pedal up dont let it drop because i found it was hard to get it to pump back up again once i had changed the hose, the cylinder had gone in and obviously there was no pressure behingd it to begin pumping the fluid around as the pedal had dropped and when lifting it by hande it just made no difference in or out , i just about caught the edge of it as i thought to myself i would have to take the master of again and release the cylinder as i began by disconeecting the pin through the clutch pedal ,it give me a little bit of manouverability to pumpp the cylinder in with my hand behind the pedal (pin being disconnected ) and then connect it back again and use pedal to carry on the the bleeding i started with the slave then when fluid coming out no air onto the master always checking for level,,,,, you ,ve probably done this anyway i just go on to much have fun:lol

 

[geoffdown]

im glad thats done ,ordered one from local motor factors blueprint one ADN 153904 £34.99 we know blueprint is £23.00 but you cant buy direct,
but 35 quid aint bad got old one of just put new one on bled all pipes sound as anything next mission front pipe and new tyre ,heres a pic of the old one exactly the same as the blueprint but mine doesnt have a damper pipe leading to the rear someone must have done away with it and capped it with a insert nut :clap:clap:clap

hi mate thanks for the part number for the flexi clutch hose got my local motor factors to get 1 for me (joe public) for£21 + vat so well happy as nissan wanted £48 +vat:clap