wheel stud

[judd750]

bought a front wheel stud for t2 off milners, got a dodgy thread on one,

thought i`d change it today,

wrong size and thread :doh wont fit the hub or wheel nut

now got a t2 in bits in the middle of the drive with no hub on it
quick message to cncfabs , job sorted ,
its in the post and a good price .

cheers cncfabs you saved the day :clap
d`dnt fancy a trip to main steelers to be sneered at for owning a 15 year old truck and been charged a fortune to wait a week, if we can get one sir !!!

 

[rustic]

I really hate having bought parts or products from a supplier, to start the job, and when you get around to fitting them, the are the wrong size, wrong product or broken.:banghead

More especially if this is your only form of transport, and you have gone past the point of no return.:doh

Some times there are two choices and it's only when you strip it down, you find you chose the wrong one. This often applies to brake parts.
So best option, is to agree to buy both and to get a cash refund on the unused one from your local friendly motor factor. NOT a credit note...:doh

I find that local motor factors can give discounts of 10%+ if you quote a local company that can get the part, but you thought you would give them the chance to match the price as you had always had good service from them...

I can usually match or better the ebay prices for most parts with the local motor factors.

However, with oil, I still find the best prices, is to stock up at your local supermarket when on offer.

Any deals going at your local supermarket?

 

[Banshee]

bought a front wheel stud for t2 off milners, got a dodgy thread on one,

thought i`d change it today,

wrong size and thread :doh wont fit the hub or wheel nut

now got a t2 in bits in the middle of the drive with no hub on it
quick message to cncfabs , job sorted ,
its in the post and a good price .

cheers cncfabs you saved the day :clap
d`dnt fancy a trip to main steelers to be sneered at for owning a 15 year old truck and been charged a fortune to wait a week, if we can get one sir !!!

Could you contact Julia at Milners about this please on 01629* 73* 44* 11

Tell her you are from Nissan 4x4 Owners club and that I have told you to ring

 

[judd750]

spoke to milners last week about the wheel stud and gave the measurements of the old and new studs , 0.5 mm difference ?
sent me a replacement and tried it today , it fits :clap

must have had a rogue stud !!!

 

[bry]

spoke to milners last week about the wheel stud and gave the measurements of the old and new studs , 0.5 mm difference ?
sent me a replacement and tried it today , it fits :clap

must have had a rogue stud !!!

A rogue stud you say.Could be me :thumbs

 

[judd750]

A rogue stud you say.Could be me :thumbs

just like you !!!!
wrong thread :naughty:naughty

 

[kwondo]

spoke to milners last week about the wheel stud and gave the measurements of the old and new studs , 0.5 mm difference ?
sent me a replacement and tried it today , it fits :clap

must have had a rogue stud !!!

I must have had the other one last year then from them.

 

[cncfabs]

I gave up buying from milners most of stuff is crap bought belts that didnt fit bushes that i had to machine down generaly poor quality and expensive postage