Vibration

[mont]

I keep getting a vibration when pulling/ labouring from under floor pan.I have looked to see if the exhust was toutching anywhare but not. As any one had anything simular ?. If weather alows I will get the ramps out tomorow and look somemore 8O

 

[Deleted Member D]

I keep getting a vibration when pulling/ labouring from under floor pan.I have looked to see if the exhust was toutching anywhare but not. As any one had anything simular ?. If weather alows I will get the ramps out tomorow and look somemore 8O

Could it be your propshaft I wonder ??? Have you had any kind of suspension lift at all ??? I get a very slight vibe on mine but Ive had a lift job done. :smile:

 

[Deleted Member S]

I keep getting a vibration when pulling/ labouring from under floor pan.I have looked to see if the exhust was toutching anywhare but not. As any one had anything simular ?. If weather alows I will get the ramps out tomorow and look somemore 8O

Could it be your propshaft I wonder ??? Have you had any kind of suspension lift at all ??? I get a very slight vibe on mine but Ive had a lift job done. :smile:

It might be worth greasing the prop shaft anyway, you will find grease nipples on the UJ's so just pump in some grease with a grease gun & it'll only take max 5 mins to do :wink:

 

[mont]

Thanks Dadba, my t2 is completly standard but will have a look round that area tommorow.

 

[mont]

Cheers Sweety , will do :smile:

 

[rossco]

Are you getting vibration at any particular speed?
Have a look at your drive shaft in particular the universal joints on the way out or lose.

Hold the drive shaft both sides of the UV and see if you can get movement through the UV by twisting the shaft against each direction if you get my drift. :wink: