bud
Well-known member
- Joined
- Mar 9, 2014
- Messages
- 254
So after my whoopsie a while back the mistral is sporting a few new mods:sly
The chassis mount for the upper A arm has been repaired, and the idler arm replaced with a reversed powersteer box with the top stripped out to allow the pitman arm to swivel freely.
made up some longer heavy tie rod adjusters and short tie rod ends to go on the navara 2wd drag link,
I have made them so when the tie rod ends are wound right into the adjuster (no thread showing) there is slight toe in, then wound them out to correct the toe/alignment.
this will help minimise the amount of exposed shank and leverage on the tie rod ends.
the rear bumper has been replaced.
90mm OD 3mm wall galv pipe.
and the front bar got some more too.
The chassis mount for the upper A arm has been repaired, and the idler arm replaced with a reversed powersteer box with the top stripped out to allow the pitman arm to swivel freely.
made up some longer heavy tie rod adjusters and short tie rod ends to go on the navara 2wd drag link,
I have made them so when the tie rod ends are wound right into the adjuster (no thread showing) there is slight toe in, then wound them out to correct the toe/alignment.
this will help minimise the amount of exposed shank and leverage on the tie rod ends.
the rear bumper has been replaced.
90mm OD 3mm wall galv pipe.
and the front bar got some more too.