Transfer Lever

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

R1cho

Well-known member
Joined
Aug 15, 2010
Messages
4,200
well today i finally got around to modding the transfer lever so i can get into 4low, the reason i've left it so long was i thought i was going to have to get mr grinder or mr hammer to talk to mr floorpan, happily this was not the case instead i just had to chop out some plastic trim

223551_10151427378872649_2065359478_n.jpg


but then the lever wasn't long enough with the nob on the top so i had to fab myself an extender

858591_10151427401242649_474672399_o.jpg


for that i just used a nut and a bolt and welded them together lol

test fit

377665_10151427404952649_2017720377_n.jpg


all looked good so i put it all back together

285600_10151427411807649_1110759222_n.jpg


so then gave it a test and all works as it should although the gator pulls a bit tight so i just unhinge it from the hooks that hold it down and its no problem
 
Just a bit confused, how does the lever go into the slot, surely the gator still stops it?
 
na i chopped a bit out of the gator too, just forgot to take pic of it lol
 
Ahhhh... :thumbs so are you impressed, I follower the thinking, and spotted the missing info?

Just proving I was reading it all..:lol:lol
 
there is a bit that says i pull the gator out so it goes in properly tho :augie
 
err, extenders are £2 off eBay, and aint the center console going to be messy looking,? also what's that black rubber thing thats under the gator where the transfer leaver pokes through? mine didn't have one of those, only a hole strait through to the gearbox:doh so i put heat shield and sound deadening across :D
 
err, extenders are £2 off eBay, and aint the center console going to be messy looking,? also what's that black rubber thing thats under the gator where the transfer leaver pokes through? mine didn't have one of those, only a hole strait through to the gearbox:doh so i put heat shield and sound deadening across :D

saved myself £2 then by making one, can only really see it if you have a good look and dont really care either way, the rubber bit is a rubber gator for when ya wading it helps stop water gettin in the truck :lol
 
the rubber bit is a rubber gator for when ya wading it helps stop water gettin in the truck :lol

ahh well the square headlight Terrano doesn't have that, might get one and shove it in for extra water proofing:D
 

Latest posts

Back
Top