Terrano tuning

[weedave]

Hi I am no longer selling them... I am happy to send you the pics of where to install a 1k pot to get the same results cheers

That would be awesome thanks.

cheers

 

[weedave]

If any one wants installation instructions then please leave your email and I will forward them to you

I personally ran one for 25k turned up as much as my clutch would take and had no issue... it's a big mod in the vw scene just we use a different pin out on the ecu

Before these where offered to sale it was run past the electricians and instrument techs at my work!!

One box was run on a dyno in Australia at a diesel tuning shop!! These are where my figures are from! The shop where very impressed as they mainly deal with big Cummins ect

At the end of the day it's down to the individual, when I first posted here I was told it couldn't be done... well it can and if you want some more power then knock yourself out..

[email protected]

many thanks George.

 

[lfteixeira]

Bringing this topic up.

How do i get my hand on that diagram?

I'm thinking on getting a tuning box and was searching the forum and came across this topic.

What's the feedback?

Thanks.

 

[Goatmaster]

Is the fabled diagram still available?
Any chance someone could put it up on the forum somewhere?

 

[Banshee]

Is the fabled diagram still available?
Any chance someone could put it up on the forum somewhere?

You're getting about a bit :lol :lol :lol :lol

Fair play mate, can't wait to see you out on the lanes with us :naughty

 

[solarman216]

I have one somewhere, will hunt it out and post it up, Rick

 

[solarman216]

found a link but does not work for me, will look for another way


Rick

 

[solarman216]

Here you go, Rick

 

[Goatmaster]

Cheers Rick much appreciated, although I was planning on doing the Evry mod first. However no more info required as I am pretty sure that I now know what to do and have resistors and potentiometer ordered up on ebay.

Thought I might just try the 1k ohm resister on its own first in an attempt to try and get some response from the turbo, then do a proper job similar to luke1997 providing that between that and the replacement MAF there is an improvement in performance.

 

[Lowie.H]

Hi George,
I'm interested in the diagrams could you sent them to me?
[email protected]
That's my email
Thanks in advance!

 

[Joakim02]

Installation instructions

If any one wants installation instructions then please leave your email and I will forward them to you

I personally ran one for 25k turned up as much as my clutch would take and had no issue... it's a big mod in the vw scene just we use a different pin out on the ecu

Before these where offered to sale it was run past the electricians and instrument techs at my work!!

One box was run on a dyno in Australia at a diesel tuning shop!! These are where my figures are from! The shop where very impressed as they mainly deal with big Cummins ect

At the end of the day it's down to the individual, when I first posted here I was told it couldn't be done... well it can and if you want some more power then knock yourself out..

could you please forward them to me? Email: [email protected] thanks alot in advance :thumb2

 

[Sema_Campos]

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

 

[Banshee]

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

I'm afraid that we don't have many (if any) Spanish speaking members on the forum, I understood MAF :lol

 

[Wallace]

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

Google translate gave this:

Is the thread still open? I would be interested in making myself a MAF AMP. If someone could give me instructions I would appreciate it.

 

[solarman216]

I do believe that when RayF was making them he put a diagram up of the module , so a bit of searching is called for, Rick

 

[Jazeitonas]

Hi if you drop me your email I can send you pics where to wire into

I recommend cab mounted

It is to some extent trial and error to suit each truck and driver... I recommend dialing it down until idle turns lumpy or picks up then knock it back a touch, 9 times out of 10 this will want slight adjustmen after a few miles

On my personal trucks I tend to run one set at a happy medium for every day then install a second one on a switch for full power/smoke

Cheers

Do you still have the diagrams?

 

[BuliT3]

Could anyone send me a wiring diagram for the pot and resistor for the Zexel pump? My mail: [email protected]

 

[solarman216]

I am not sure I still have one as do not think it actually works so probably deleted it in disgust, Banshee might know but he is not on much, the MAF amp certainly does work but Ray is no longer building them, Rick

 

[BuliT3]

Does anyone have a diagram on how to do it?