...
But if I had my time again, and was buying a base for an offroader, rather than paying £2k for a 2002 newer plate like I did 2 years ago, I wish I had waited and found a mint 98/99 low mileage truck and paid £2k for the older plate, and arguably stronger base vehicle...
Oh does that then mean that my 1995 LWB Maverick, with no structural rust, no welding, and waxoyled from new, and still in pristine condition, with less than 97k miles is worth more each year...? It's book price has been low for a few years, it can't drop anymore, so it must be appreciating. Well I appreciate it anyway...:lol:lol
After 18+ years of ownership, I doubt I would want to sell it, and I wouldn't even do a swap with a newer model, even if they paid me extra.:doh
Ok nice to have the extra power, Air con, ABS, but all these extras means higher costs over the years in maintenance and repairs. I also think that Ford in the early days, 93 onwards, insisted on better under seal, as this was their first ever UK vehicle to have 3 years warranty, to match Nissan.
With reference to the rear floor pan, from what I have seen on this site, you cannot get a good idea how bad the rear floor pan is from underneath unless it is really bad, due to the double skin. A good way, for example on the LWB, is to raise the second row of seats, and lift the carpet and look towards the rear at the seat belt mount, and on the floor where the seat locking hoop is, this will probably be the first place to go.
From my experience, and the only item on mine to suffer from the tin worm was the forward seam of the fuel tank, this is where it sprung a leak. But it took 18 years to show. You will probably find that ALL Terranos and Mavericks have started to go here, judging by how difficult it was to find a good second hand one. So have a look here too.
Front ARB joints go regularly, but an easy fix, to test your vehicle, if safe to do so and on level ground, handbrake off, and rock the car sideways, with the driver's door open, push upwards on the inside part of the roof, if you hear a few clonks, it is likely to be those OR other suspension components. Grounds for a price reduction...
While you are under there, check out the universal joints on the prop shaft, the rears have 2 nipples, and should be regularly greased. Early ones had 3 Nipples on the front prop shaft, but since they were rarely used ie only in 4wheel drive, due to the free wheel hubs, Nissan decided that these nipples weren't really necessary, however another department then decided that the Auto hubs weren't really required, and put fixed hubs in, which meant that the front prop shaft was doing as many miles as the rear...:doh. However without proper lubrication, ie no grease nipples, then wore out really quickly.:doh
Well I think we have aired most of our dirty washing, basically these truck are brilliant, spend more time on the road than on the hard shoulder:augie
Like all vehicles, avoid launching boats in salt water, if it means going up to the axles.
Regularly wash mud from under the wheel arches and rinse underneath after salt on the road.
Rustic