Swb/lwb exhausts

[Greenchef]

Could any one tell me if the front section (the bit with the flexie) is the same on short and long wheel base y60's?
Thanks in advance.

 

[CliveG]

Could any one tell me if the front section (the bit with the flexie) is the same on short and long wheel base y60's?
Thanks in advance.

Can't help but would like to know best place for a lwb exhaust,mine is a lhd would it be the same?:doh

 

[firebobby]

My local garage sourced mine from one of their suppliers, I fitted it myself

 

[Nav230]

First off it depends if you have a N/A or turbo 4.2 or a 2.8 Turbo.

I've heard that there can be some very minor differences in front pipes for N/A motors making them difficult but not impossible to fit. From what I can see the difference in the short and long wheelbase exhausts is in the middle box ( it has longer pipes)

If your flexy has gone on your front pipe, the flexy bits are widely available just weld or clamp a new one on.

There's loads of exhausts on ebay, some very cheap suppliers in Germany too that will post to the UK for about 12 quid.

 

[Greenchef]

Thanks for the reply. Was hoping to use the front end exhaust from a n/a 4.2 from a shorty on my 4.2 n/a lwb, just wondering if they are the same part? They look mighty similar!