sve patrol y61 oil filter repalcing

[blitzskymaster]

Hi guys! I just bought a 3.0 sve patrol 2003 and now trying to do oil:augie change but finding it hard to remove the filter housing should i be turning clockwise or anticlockwise to remove, im just afraid i will bust the housing any ideas???

 

[sidsid06]

Hi guys! I just bought a 3.0 sve patrol 2003 and now trying to do oil:augie change but finding it hard to remove the filter housing should i be turning clockwise or anticlockwise to remove, im just afraid i will bust the housing any ideas???

your try to remove the oil filter? to replace with new 1, should be anti clock wise! to remove the filter i would have thought.... is on my t2 and d21! they can be sods to get off tho any wellcome sure their be more posts later when every body is back from their saturday shop around m and s

 

[patrol parole]

Yes, As sidsid06 said just to confirm it as on my patrol, definatly anti-clockwise
to undo..but a bit tricky as i had to stand on a stool (short arse) to get both my hands in, but ended up getting one of them strap wrenchs,as it was to tight hope this helps..:thumb2

 

[Spook]

All oil filters should come off anti-clock, check the thread on the new one if in doubt
when re-fit make sure put some oil on seal first, and only hand tighten as per what it says on side of filter (usually once seal made contact then another 2/3 turn. if it still leaks after runing tighten a bit more until it doesn't leak - makes it alot easier next time you need to change it:clap

 

[blitzskymaster]

Got it!!

Thanks guys! runs alot quiter now since change!!