Rear Diff Oil Again

[Darwin]

ok I have the lsd oil , do I just drain the old out and pour in the 2.3L of new stuff ?

 

[extreme-4x4]

ok I have the lsd oil , do I just drain the old out and pour in the 2.3L of new stuff ?

yep but i think its 2.8 - 3 litres on yours darwin

but you will know when its up to level cos the filler hole is the level. so fill till it overflows, let it settle then replace the filler cap. simples

 

[lacroupade]

yep but i think its 2.8 - 3 litres on yours darwin

but you will know when its up to level cos the filler hole is the level. so fill till it overflows, let it settle then replace the filler cap. simples

korrekt.....2.8 litres on the MkII and about 1.8 on the MkIII/IV.

 

[Darwin]

Cant budge it , even with WD40 and 600mm bar

 

[extreme-4x4]

run it around the block for half an hour and get it warm

lots of hard turning

 

[Darwin]

run it around the block for half an hour and get it warm

lots of hard turning

I positioned the bar so i could jack against it

job done.

lots of metal though , the magnetic plug looked furry

 

[BongoBerry]

I positioned the bar so i could jack against it

job done.

lots of metal though , the magnetic plug looked furry

impact driver is normally a better option imho

 

[Darwin]

impact driver is normally a better option imho

i used what I had :lol