Pulling to the right on braking

[blackbird]

My m reg 2.4 is pulling to the left on breaking.

I guess its the caliper.

There's a few refurbished calipers on ebay that say they fit a 2.4

But the seller says he's checked the reg number and it says they won't fit ??

Any ideas?

Sent from my SM-G960F using Tapatalk

 

[blackbird]

They said this one WONT fit

But it says 2.4 and my year

I'm confused

https://www.ebay.co.uk/itm/BRAKE-CA...-/124144957460?_trksid=p2349624.m46890.l49292

Sent from my SM-G960F using Tapatalk

 

[Banshee]

I hate situations like this, I wouldn't like to say without doing a side by side comparison just in case there were any differences.

I can't imagine Nissan would have done a different calliper for the Petrol

 

[elty001]

The only calipers that are different are from the imported mistral.
I've got a pair from a 1995 2.4 on my 2000 2.7 tdi.
They are idential from 1993 onwards on all R20 European terrano's:thumb2

 

[Banshee]

The only calipers that are different are from the imported mistral.
I've got a pair from a 1995 2.4 on my 2000 2.7 tdi.
They are idential from 1993 onwards on all R20 European terrano's:thumb2

There we go :thumbs

 

[blackbird]

Thanks all

Sent from my SM-G960F using Tapatalk

 

[solarman216]

Depends on year as far as I know, 96 to 2000 are the same, Rick

 

[solarman216]

But why not strip yours down, it will most likely be the slider pins seized, with heat and gentle persuasion they can be freed, Rick

 

[blackbird]

The brakes are perfect.
And totally balanced

Garage says its the full length tie rod and the inner and outer tie rods

 

[blackbird]

Pic

Sent from my SM-G960F using Tapatalk

 

[blackbird]

Pic

Sent from my SM-G960F using Tapatalk

 

[blackbird]

Pic

Sent from my SM-G960F using Tapatalk

 

[elty001]

Also worth checking the idler arm bush while you are doing all that lot.

 

[blackbird]

Where the best place to get them ?

Sent from my SM-G960F using Tapatalk

 

[elty001]

Where the best place to get them ?

Sent from my SM-G960F using Tapatalk

The idler bush or the relay rod and tie bars?

 

[Banshee]

Where the best place to get them ?

Sent from my SM-G960F using Tapatalk

Don't buy one from Milners!!!!

Last one I brought the holes on the arm didn't line up with the chassis, I rang them up and was told to drill new holes :nenau

Or you could really beef it up and do the "Super Strong Steering Mod"

 

[Flying Torquewrench]

Zac, where do you recommend to go for parts?

 

[Banshee]

Zac, where do you recommend to go for parts?

Rob and Heidi at Japanese 4x4 Spares in Honiley

https://www.japanese4x4spares.co.uk/

 

[Flying Torquewrench]

Cheers!

 

[blackbird]

So these from milners won't fit properly
Is it?

https://www.milneroffroad.com/produ...re-rod-right-or-left-hand-drive-004173/004173

https://www.milneroffroad.com/produ...-track-tie-rod-end-kit-1-side-006212k/006212K

Sent from my SM-G960F using Tapatalk