Power loss help

[panelbeater]

Looked ay New t2 and fuel goes onto front st the top banjo,so now at n.broken t3 fuel lines the dame as new one so on both of mine fuel goes onto front top banjo not out to tank so will get stripping.

 

[dave123]

Looked ay New t2 and fuel goes onto front st the top banjo,so now at n.broken t3 fuel lines the dame as new one so on both of mine fuel goes onto front top banjo not out to tank so will get stripping.

so are you trying to say rick was right ?

 

[panelbeater]

Sorry but on both of mine it goes on on the top,front banjo.
Now I am not saying right or wrong but the blue t2 runs on this pipework but the green one is the same but does not so started stripping to change the ip.
Now what is the easy way to take the rad out.
It's all loose bit can't get to the bottom right hose clip from above.
So can't get rad or fan shroud off.
Now thinking about taking fan blades off,bit tight getting in but with that out of the way will rad and shroud lift out as I do not want to damage hose.

 

[cncfabs]

You need to get underneath to take bottom hose off the rad to allow the shroud to seperate from the rad then pull the rad out

 

[jims-terrano]

Does it show you how to remove rad in the water pump download? Worth a check maybe.

 

[panelbeater]

I am not very mobile so trying to not get on the floor to remove it but guess I will have to.
Got home today and Ricks pump has arrived,so thanks Rick.
Just waiting for a 100w solar panel for my mate then back to broken t2 and hope I get it fixes as away 1st.