Positive camber (front) after raising truck ?

[niks_terrano ii]

Hi guys I've raised my Lwb maverick by 2" at the back using spring spacers and adjusted the front accordingly but I now have positive camber at the front?

Any ideas why the positive camber wasn't there before I adjusted the torsion bars ?

 

[Sweety]

As you increase the height the front wheels become closer together at the bottom due to the angles of the suspension arm thus causing the positive camber.

 

[R1cho]

lower the front a bit it will improve, next step is spacer rings on the top arms

 

[niks_terrano ii]

What about re indexing the torsion bars ?

 

[Banshee]

What about re indexing the torsion bars ?

Thats what he's done thats caused it lol

 

[stinka]

Should have negative camber after lifting, ie. the top of tyres are further in to arch

I spaced mine back out with 2.5mm m14 washers, I also needed longer bolts

 

[niks_terrano ii]

.

Guys so what do I need to do to sort the positive camber ?

I need to sort it before the crappy weather arrives I'm running 31's and have lifted the back so can't lower it to much It really needs re indexing and going higher but I don't want to make the positive camber worse mmm

 

[Lincs Mav]

Got my negative camber sorted today had to get tracking done aswell all ok now.

Cheers Gav

 

[Banshee]

Not sure if this will be any use to you, I started this thread after I lifted mine and had the same issue

http://www.nissan4x4ownersclub.com/forum/showthread.php?t=18594